exton, Exton Linux distributions, Raspberry Pi systems

RaspArch Rpi4 Build 220216 :: Run Arch Linux on your new Raspberry Pi 4 computer :: Install it using Rufus 3.17, Win32 Disk Imager or Etcher in Windows!

Leave a comment

RaspArch Build 220216 especially for the new Raspberry Pi 4 released in May 2020
This version (220216) is especially made for the new Raspberry Pi 4, but it can of course also be used on a Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B.

RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of about 230 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yay, Gimp and NetworkManager the system has increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 4, Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B computer.

WHO should run Arch Linux/RaspArch?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

Study all installed packages in RaspArch…

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop – logged in as archpi
Screenshot 2 of RaspArch’s Desktop – logged in as root

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

ArchEX (Arch Linux) “Mini” with LXQt 1.0.0, all Arch Linux installation scripts, VirtualBox Guest Additions and kernel 5.16.7 :: Build 220212

Leave a comment

NEWS ABOUT ArchEX 220212
I’ve made a new extra “Mini” version of ArchEX. It has three advantages compered with ArchEX Build 220206.

A) This ArchEX build is smaller. The ISO file is “only” of 1760 MB compered with Build 220206 which is of 3670 MB. This is of importance since ArchEX can run very fast live from RAM. So your computer needs lesser RAM to run Build 220212. Should be enough with 2 GB. NOTE: I was hoping to make the ISO file even smaller, but that was impossible since Calamares Installer has a lot of dependencies.

B) ArchEX Build 220212 has all Arch Linux original installation scripts, which means that you can use this build to install Arch Linux “the Arch way” following the Installation Guide. Or you can just follow my example here. You can have my instructions up in Firefox while installing as this screenshot shows. When installing from Arch Linux official live DVD you’ll have to do it in console mode. (Could be tricky).

C) If you install Arch Linux (or ArchEX using Calamares) in VirtualBox or Qemu you can do it in full screen. VirtualBox Guest Additions are pre-installed in ArchEX Build 220212. Watch this screenshot. In Qemu you can just choose the screen resolution you want.

SCREENSHOTS
1. ArchEX Mini Desktop for user exton
2. ArchEX Mini Desktop for root
3. ArchEX Mini running Samba
4. ArchEX Mini installing LibreOffice while running live

READ MORE about both ArchEX versions…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

ArchEX (Arch Linux) Live with Deepin 20.4, GNOME 40, Gnome Classic, LXQt 1.0.0, LXDE, kernel 5.16.5-arch1-1, Yay, Spotify and Calamares Installer – Build 220206

Leave a comment

NEWS about ArchEX 220206
A new version of ArchEX is ready! In this new version, which I call ArchEX 2022, I have added the Deepin 20.4 (latest) Desktop environment. Deepin (made in China!) is devoted to providing a beautiful, easy to use, safe and reliable system for global users. I came to like Deepin very much when I installed it in ExTiX 22.1. So I thought why not install Deepin also in ArchEX? Furthermore I have added the GNOME 40 (latest) and LXQt 1.0.0.1 (latest) Desktop environments. As “extra Desktop environments I’ve added Gnome Classic and LXDE. So altogether five (5) different Desktops environments to try out while running ArchEX live or from hard drive!

Study all installed packages in ArchEX 2022 with Deepin/GNOME 40/Gnome Classic/LXQt/LXDE.

REPLACEMENT
This version (220206) of ArchEX replaces version 210526. I’ve replaced Yaourt with Yay – Yet Another Yogurt – An AUR Helper Written in Go. I came to know that Yaourt is dead. I.e. Yaourt is not being developed anymore. So in the new version of ArchEX I have upgraded all included packages, installed a new kernel (5.16.5) and replaced Yaourt with Yay. NOTE: While running ArchEX LIVE (from a DVD or USB stick) you can now do so super fast from RAM. Watch this screenshot. I.e. use boot alternative 3 (Copy to RAM). In this new version I’ve also added more support for Broadcom WiFi cards. I.e. kernel modules b43 and wl will be loaded from boot.

WHO should run Arch Linux?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

Screenshots
ArchEX Deepin Desktop
ArchEX GNOME 40 Desktop
ArchEX LXQt Desktop
ArchEX running in VirtualBox with Guest Additions installed
ArchEX running in Qemu
ArchEX Gnome Classic Desktop

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

exton, Exton Linux distributions

PuppEX Focal64 Linux Live DVD with kernel 5.16.2-exton and VirtualBox Guest Additions :: Build 220201

Leave a comment

ABOUT PuppEX Focal64 Build 220201
This Puppy derivative is built from Puppy Linux 9.5 FossaPup64. I have added PCManFM and LXterminal. Also many development tools. Furthermore I have compiled a new kernel – 5.16.2-exton and pre-installed VirtualBox Guest Additions. Watch a screenshot when PuppEX is running in full screen in VirtualBox. PuppEX Focal64 (both versions) are compatible with Ubuntu 20.04 (Focal Fossa), which means that Ubuntu packages for Ubuntu 20.04 LTS can be installed and used in PuppEX. Ubuntu 20.04 LTS will be supported until April, 2025.

NOTE1: For some unknown reason PuppEX Build 220201 won’t boot on newer UEFI computers. It works well on older computer though. I have therefore kept the old PuppEX version from 201119, which can run on all “normal” computers.

NOTE1: The good thing about PuppEX Build 220201 is that you can run it very well on older non-UEFI computers, VirtualBox, VMware and Qemu. You can also do a manual installation to any computer provided that you have at least one Linux system installed and use Grub as bootloader. Do it like this.
1. Extract everything in the PuppEX ISO to a folder in the root (/) of your existing Linux system. Watch this screenshot.
2. Then just add boot lines for PuppEX in /etc/grub.d/40_custom or /boot/grub/grub.cfg. Watch this screenshot and this example of a 40_custom-configuration.
3. You can/should also read my instruction How to dual-boot, triple-boot or multi-boot Linux with Windows in a simple way and be happy...

Study ALL installed packages in PuppEX Focal64 – 220201

SCREENSHOTS
1. PuppEX Focal’s Desktop – 220201
2. PuppEX Build 220201 running in full screen in Qemu
3. PuppEX Build 220201 running in full screen in VirtualBox

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

SlackEX (Slackware) 15.0 RC3 (released 220113) with Enlightenment 0.25.1 (released 220103) respectively Xfce4 as an alternative DE, Refracta Installer and Refracta Snapshot (so you can create your own Slackware 15.0 system) ::: Build 220117

Leave a comment

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX Build 220117 with the Enlightenment and Xfce4 Desktops
A new extra version of SlackEX is ready. It is based on Slackware 15.0 RC3 released 220113. In this version I’ve installed Enlightenment 0.25.1 – latest version and Xfce4. I’ve also replaced kernel 5.10.70-exton with kernel is 5.16.0-exton. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. When installing version 0.25.1 I had to do it from source. The whole thing was very time consuming since a lot of dependencies had to be satisfied. The most important package installed is Refracta Snapshot. With that you can build your own Slackware distribution with Enlightenment 0.25.1. When a new version of Enlightenment is ready you too should be able to install it from source. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. You can easily switch from Enlightenment to Xfce4 by editing /root/.xinitrc. Watch this screenshot. Then log out and back again. That can of course also be done when running SlackEX live. (From a DVD or USB stick). Study the full package LIST in SlackEX Build 220117. This Build of SlackEX replaces version 211014 (with Xfce4) and version 201112 (with Enlightenment). NOTE: You’ll run SlackEX Build 220117 as root. The password for root is root. If you don’t like to run a Linux system as root you can create a “normal” user. Watch this screenshot.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware. And this article explains how Slackware works in 2021/2022.

SCREENSHOTS
Screenshot 1 – root’s Desktop – Enlightenment
Screenshot 2 – root’s Desktop with Xfce4 as DE

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

ExTiX Deepin 22.1 Live based on Deepin 20.3 (latest) with Skype, Spotify, Refracta Snapshot and kernel 5.16.0-exton :: Build 220114

2 Comments

NEWS 220114 ABOUT ExTiX Deepin
I’ve released a new version of ExTiX Deepin today (220114). This ExTiX Build is based on Deepin 20.3 released by Deepin Technology 211123.

NEW FUNCTIONS etc
1. You can run ExTiX from RAM. Use boot alternative 2 (load to RAM) or Advanced. A wonderful way to run Linux if you have enough RAM. Everything will be super fast. When ExTiX has booted up you can remove the DVD or USB stick.
2. You will have the opportunity to choose language before you enter the Deepin 20.3 Desktop. All main languages are supported.
3. I have replaced Deepin Installer with the Reborn version of Deepin Installer. Works better in every way.
4. I have replaced kernel 5.14.2-exton with kernel 5.16.0-exton. Corresponding the latest available stable kernel from Kernel.org.
5. Spotify and Skype are pre-installed.
6. You can watch Netflix while running Firefox.
7. You can install ExTiX Deepin also in VirtualBox/VMware using Refracta Installer or Deepin Installer. (In previous versions you had to “chroot” into the install partition and install Grub).
8. As an alternative to Apt you can use the Cactus Package Manager. Example commands: cpm i mousepad and cpm s gimp. (Install Mousepad and search for Gimp). CPM works very well.
9. Install ExTiX to a USB stick preferably with Rufus 3.17 in Windows – see below how it looks.
10. In version 220114 I’ve also included Refracta Installer. Use it in VirtualBox if you want to have an exact copy of ExTiX Deepin installed. You don’t have to “chroot” to install Grub. Just choose to “Copy Grub files” when asked to. Watch this screenshot.
11. VirtualBox Guest Additions are pre-installed. With those installed you can run ExTiX in full screen in VirtualBox. Watch this screenshot.

UNIQUE
I may add that there is no other live version of Deepin 20.3.

SCREENSHOTS
1. ExTiX running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. Spotify is running
3. Netflix is running in Firefox
4. ExTiX running in VMware Workstation Player in Windows in full screen after VMware Tools have been installed
5. ExTiX running in Qemu in Linux (Ubuntu). NOTE: ExTiX Deepin (and other Linux systems) runs very fast in Qemu (in Linux). Qemu is a generic and open source machine emulator and virtualizer. Superior to VirtualBox…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

SlackEX (Slackware) 15.0 RC2 with LXQt, Refracta Installer and Refracta Snapshot (so you can create your own Slackware 15.0 system) ::: Build 220110

1 Comment

NEWS ABOUT SlackEX 15.0 RC2 with LXQT
Because I like Slackware so much I’ve made a new extra version of SlackEX 15.0 RC2. This time with LXQt as Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. LXQt is not included in Slackware’s repositories. I’ve built the LXQt packages following the instructions at Gitlab.com. If you already have Slackware/SlackEX installed to hard drive you can do the same. (If you want LXQt). It’s very easy if you have KDE installed. Otherwise you’ll have to install some KDE/LXQt dependencies. Not that difficult though. So SlackEX Build 220110 is a live remaster of Slackware 15.0 RC2. It was released 211118. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Kernel 5.15.5-exton-amd64-rt21 is used. You can (of course) install Slackware’s latest kernel 5.15.13 if you want. But to be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 5-15-5-exton-amd64-rt21. Study all pre-installed packages in Build 220110…

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remasters of Slackware Current (15.0/14.2), which I call SlackEX 15.0/14.2/Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEW features in version 220110 of SlackEX
Kernel 5.15-5-exton-amd64-rt21 is used so that Refracta Snapshot can be used. Using Refracta Snapshot you can change everything and create your very own Slackware 15.0 system. Read more about Refracta Snapshot. LXQt is used as Desktop environment. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install using Refracta Installer. A lot of other Slackware packages are pre-installed. Study the full package LIST. Log in to LXQt as the ordinary user user with password live or as root with password root. While running SlackEX LXQt in VirtualBox you can do so in full screen since VirtualBox Guest Additions are pre-installed. Watch this screenshot. Also showing a Samba connection in VirtualBox.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware. And this article explains how Slackware works in 2021/2022.

SCREENSHOTS
Screenshot 1 – user’s Desktop – LXQt
Screenshot 2 – Showing a Samba connection – LXQt
Screenshot 3 – MPlayer is running
Screenshot 4 – The live boot screen

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions

CruxEX 2022 (CRUX 3.6.1) 64bit Linux Build 220104 – Install it to a USB Pen Drive and enjoy PERSISTENCE!

Leave a comment

LATEST NEWS ABOUT CruxEX 220104
I have released a new version of CruxEX today. This version has VirtualBox Guest Additions pre-installed, which means (among other things) that you can run CruxEX in VirtualBox in full screen. Read about how to install and run CruxEX from a USB stick in VirtualBox. Watch a screenshot when CruxEX is running i VirtualBox in full screen. (Using VirtualBox Guest Additions).

CruxEX 2022 64 bit Linux Live USB is based on CRUX 3.6.1 (latest version, released 201212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86_64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.6.1 2022 uses the LXDE Desktop environment. I have replaced the original CRUX kernel 5.10 with “my” special kernel 5.15.12-exton-amd64, with support for “extra everything”.

Replacement
My first remaster of CRUX 3.6.1 is from 201223. Now (220104) I have upgraded all included packages and replaced kernel 5.9.15-exton with kernel 5.15.12-exton-amd64. Study the most important upgraded packages.

Kernel and installed packages
Kernel 5.15.12 is the latest available stable kernel as of 220104. Among all installed and updated applications are Firefox, Google Chrome (for Netflix), GParted, PCManFM, Pulseaudio, Slim Login Manager, Gimp and NetworkManager. Furthermore compilation tools so that you can install programs from source. Note: Google Chrome is not in CRUX repositories. Nvidia Graphics Driver 470.94 is pre-installed. It will be automatically used if your computer has support for it. Furthermore I’ve installed VirtualBox Guest Additions so that you can run CruxEX in full screen in VirtualBox. Watch this screenshot.

Unique
CruxEX 3.6.1 2022 build 220104 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading. The good thing with CruxEX is that it is a live system (which CRUX original isn’t) and that you can run CruxEX super fast from RAM. Also that you can install CruxEX to hard drive in about 5 minutes and then have a ready-to-go CRUX desktop system. You can after that install any (extra) desktop environment you like. NOTE: You can (of course) install new Desktops environments and other stuff also when running CruxEX from a USB stick – PERSISTENCE! Note also: To make CRUX original ready for everyday use will normally take 2 – 3 days!

SCREENSHOTS
1. The LXDE Desktop for the live user
2. The LXDE Desktop for root
3. Prt-get in action
4. CruxEX running from USB in VirtualBox
5. The USB live boot screen
6. Netflix running in Google Chrome
7. Wireless connection
8. Running Alsamixer for sound
9. Spotify Web Player is running

Study ALL installed packages…

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions, Raspberry Pi systems

RaspEX Rpi4 based on upcoming Ubuntu 22.04 LTS “Jammy Jellyfish” with LXDE, kernel 5.10.87-exton-v7l+, Raspotify, RealVNC, PuTTy, Samba and Bluetooth :: Build 211221

Leave a comment

NEWS 211221 about RaspEX with LXDE based on upcoming Ubuntu 22.04 LTS Jammy Jellyfish.
I have upgraded the whole system and replaced the old kernel 5.4.83-exton-v7l+ with kernel 5.10.87-exton-v7l+. RaspEX Build 211221 is a Linux ARM system for Raspberry Pi 4 with 2GB/4GB/8GB RAM and Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B or Raspberry Pi 2 Model B. It is based on Debian, Ubuntu 22.04 LTS and Linaro (Open Source software for ARM SoCs). Both Firefox and Midori Private Browser are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and Raspotify – Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that just works. Study all installed packages in RaspEX Build 211221.

More about RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) with many other useful programs pre-installed. Firefox is used as Web Browser and Synaptic as Package Manager. You can use Samba and RealVNC to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 4 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Kernels
Kernel 5.10.87-exton-v7l+ (for Rpi 4) and 5.10.87-exton-v7+ (for Rpi 3/2) are used in Build 211221.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Bullseye) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2 Model B) was like running Raspberry Pi on “steroids“. If you use the new Raspberry Pi 4 RaspEX will run even faster!

SCREENSHOTS
Screenshot 1 – raspex’s Desktop 211221
Screenshot 2 – root’s Desktop 211221
Screenshot 3 – running YouTube in Firefox
Screenshot 4 – RaspEX connected to Windows 10 via PuTTy
Screenshot 5 – RaspEX “running on” Windows 10 with VNC-viewer
Screenshot 6 – RaspEX using Pavucontrol (for sound control)
Screenshot 7 – RaspEX running Raspotify

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux distributions, LINUX

DebEX Budgie/Gnome/Enlightenment – Build 211215 – with Budgie Desktop 10.5, Gnome 40, Enlightenment 0.24.2, penguins-eggs (remaster tool) and kernel 5.15.5-exton-amd64-rt21

Leave a comment

About DebEX Barebone Budgie/Gnome/Enlightenment, DebEX Gnome and DebEX KDE Plasma Linux 64 bit
All three systems/distributions are based on Debian. Budgie Desktop 10.5, Gnome 40 and Enlightenment 0.24.2 are used as Desktop environments in DebEX Budgie/Gnome/Enlightenment Build 211215. Gnome 3.38 is used in DebEX Gnome. KDE Plasma Desktop 5:20 is used in DebEX KDE. The system language is English (in all three versions of DebEX).

NEWS 211215 about DebEX Budgie/Gnome/Enlightenment – a penguins-eggs Build
A new version of DebEX – based on Debian Sid (unstable) – with Budgie Desktop 10.5, Gnome 40, Enlightenment 0.24.2 and kernel 5.15.5-exton-amd64-rt21 is ready. All packages have been updated to the latest version as of December 15, 2021.

Most important Changes
When you start up DebEX Build 211215 live (from a DVD or a USB stick) you will end up logged in as the ordinary user user to the Budgie Desktop. The password for user is live. You can log out from Budgie and log in again to Gnome or Enlightenment. You can also log in from LightDM as root (super admin). The password for root is root. NOTE: You can’t log in to the Enlightenment Desktop when running DebEX Build 211215 in VirtualBox or VMware. You can use the Calamares 3.2.48-1 Installer Framework to install DebEX Budgie/Gnome/Enlightenment to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. Watch this animated GIF. My other DebEX builds were created with Refracta Snapshot. This DebEX Build (211215) is, however, created with a remaster tool called penguins-eggs. Very easy to handle. Penguins-eggs is a console utility, in active development, who let you to remaster your system and redistribute it as iso images or from the lan via PXE remote boot. You can use penguins-eggs in any Debian/Ubuntu system installed to hard drive. Basically you only need to start up a terminal and run the command sudo eggs dad -c. Then just follow the instructions – see the screenshots below. If you haven’t installed Calamares you will be asked to do so. Do that even if you already have Calamares installed. A system/ISO built with penguins-eggs must use a special Calamares version to be installable. Penguins-eggs is developed by Piero Proietti. It is based on Remastersys, Refracta, Systemback and father Knoppix.

How-to use penguins-eggs
1. Install DebEX (or any other Debian/Ubuntu based system) to hard drive
2. Change everything to your liking
3. Open up a terminal and run the command sudo eggs dad -c
Screenshot 1 – NOTE: If you choose fast your new ISO will be ready in about five minutes (even in VirtualBox). If you choose max it will take about two hours (in VirtualBox), but the ISO will be about 500 MB smaller. (As regards new builds of DebEX Build 211215). A smaller ISO has one disadvantage. It doesn’t boot as fast as the one built using the option fast.
4. Go on choosing Yes
Screenshot 2
5. Go on choosing Yes
Screenshot 3
6. Go on choosing Yes
Screenshot 4
7. You new ISO is ready!
Screenshot 5
NOTE: You can remaster DebEX in VirtualBox or VMware if you want. VirtualBox Guest Additions are pre-installed so you can run DebEX in full screen in VirtualBox. Watch this screenshot.

OTHER SCREENSHOTS
1. The Budgie Desktop for the ordinary user user
2. The Gnome Desktop for user
3. The Enlightenment Desktop for user
4. The Boot menu when running DebEX live
5. The Boot menu when running DebEX from hard drive (in VirtualBox)
6. A Samba connection in DebEX – a way to transfer your new ISO to another computer
7. Installing and running Spotify in DebEX

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

About all Exton Linux distributions