Run Android apps directly in Windows 11!

Recently I came across an article called How to Sideload Any Android App on Windows 11. There are many similar articles out there, but the one I refer to is easiest to follow. So with Windows 11 it is possible to sideload Android apps natively without any third-party application. I followed the instructions to the letter. I am now able to run most Android apps on two of my computers in Windows 11. One computer with a touchscreen, which can be useful when running Android apps.

When I had done everything stated in the article I could start the app Windows Subsystem For Android. See the screenshot below.

When running the Amazon app I could choose to download and install hundreds of Android apps. Many quite advanced. For example LEGO Boost. See a screenshot below.

I could also download apk files an install them via ADB. See a screenshot below when I’m installing the Photo Lab app.

Finally a screenshot below showing how it looks when the Amazon Appstore is running.

All Android apps installed on your computer gets integrated in Windows menus. Watch this screenshot below.

Everything is very easy to set up. And it’s fun too! You should try it.

exton/ 221231

MX Linux 21.2.1 Exton Remix 64bit with Xfce/LXQt DE and kernel 5.10 replaced by kernel 6.1.0-amd64-exton :: Build 221228

ABOUT my MX Linux 21.2.1 Remix 221228
MX Linux (based on Debian) is by far the most popular Linux system in the world according to DistroWatch.com. I tested MX Linux a few years ago and noticed immediately that one can change the MX system and create a new ISO with MX Snapshot. My first MX Linux Remix is from 191018. And my second remix was ready 220524.

MX Linux 21.2.1
My first remix was based on MX Linux 18.3 (released in May 2019). MX Linux 21.2.1 Wildflower was released on September 18, 2022. It is based on Debian 11.6 (Stable/Bullseye).

My changes of the original MX Linux 21.2.1 system
1. All packages have been upgraded to the latest version as of 221228. Study the full package LIST.
2. The original kernel 5.10 is replaced by “my” kernel 6.1.0-amd64-exton.
3. I’ve added the LXQt Desktop. It’s in version 1.1.0 released on November 6, 2021.  I have installed LXQt 1.1.0 from source. (Took me a few hours). NOTE: I have (of course) also kept the original Xfce 4.16 Desktop.
4. You can run my MX Linux remix in full screen in VirtualBox, since VirtualBox Guest Additions are installed. Watch this screenshot. You can also run MX in full screen in VMware Workstation Player. Watch this screenshot.

5. Some cosmetic changes. I.e. nice wallpapers. I have kept the wallpapers from version 220524.

Installation to a USB stick
Please note that you can only use Rufus 3.21 in Windows for USB installations. If you use other software the stick won’t be made bootable. Note also that you must write in DD image mode. One exception: You can without problems use Ventoy (instead of Rufus).

Performance
Everything in my remix works very well. MX Linux works on new and old computers. I can mention that I could run (and install) my MX remix without problems on my 17 year old laptop Acer Aspire 5102WLMi. You can of course make your own MX Linux Remix with my remix as “groundwork”. The whole process will only take about 5 minutes! Also in VirtualBox. Watch this screenshot showing how it looks when MX Snapshot has started.

Login
Login to the Xfce4 or the LXQt Desktop as live with password live or as root with password root – see below how it looks.

Hard drive installations
Use MX Installer. It works very well. Watch a YouTube Video about it.

Create your own MX Linux Remix
Use MX Snapshot. It is very easy to do. The whole process will only take about 5 minutes! Also in VirtualBox. Watch this screenshot showing how it looks when MX Snapshot has started.

SCREENSHOTS
1. root’s Desktop in LXQt 1.1.0
2. live’s Desktop in LXQt
3. live’s Desktop in Xfce4
4. Showing WiFi connections
5. Running in full screen in VirtualBox
6. Running in full screen in VMware
7. Using the KDE Plasma Desktop (not pre-installed in Build 221228)

Watch a YouTube Video about my MX Linux Remix v. 220524…

DOWNLOAD
The ISO can be downloaded from the Swedish Linux Society.

md5sum

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

ExTiX Deepin 22.12 Live based on Deepin 20.8 (latest) with Refracta Snapshot and kernel 6.1.0-amd64-exton :: Build 221218

NEWS 221218 ABOUT ExTiX Deepin
I’ve released a new version of ExTiX Deepin today (221218). This ExTiX Build is based on Deepin 20.8 released by Deepin Technology 221208. Using Refracta Snapshot (pre-installed in ExTiX) you can make your own live installable Deepin 20.8 version with ExTiX 22.12 as “groundwork”.

NEW FUNCTIONS etc

1. You can run ExTiX from RAM. Use boot alternative 2 (load to RAM) or Advanced. A wonderful way to run Linux if you have enough RAM. Everything will be super fast. When ExTiX has booted up you can remove the DVD or USB stick.
2. You will have the opportunity to choose language before you enter the Deepin 20.8 Desktop. All main languages are supported.
3. I have replaced Deepin Installer with the Reborn version of Deepin Installer. Works better in every way. Watch this movie (slideshow).
4. I have replaced kernel 5.18.1-amd64-exton with kernel 6.1.0-amd64-exton. Corresponding the latest available stable kernel from Kernel.org.
5. Spotify and Skype are pre-installed.
6. You can watch Netflix while running Firefox.
7. You can install ExTiX Deepin also in VirtualBox/VMware using Refracta Installer or Deepin Installer. (In previous versions you had to “chroot” into the install partition and install Grub).
8. Install ExTiX to a USB stick preferably with Rufus or Ventoy in Windows – see below how it looks when I’ve used Ventoy.
9. In version 221218 I’ve also included Refracta Installer. Use it in VirtualBox if you want to have an exact copy of ExTiX Deepin installed. You don’t have to “chroot” to install Grub. Just choose to “Copy Grub files” when asked to. Watch this movie (slideshow).
NOTE1: If you want to remaster ExTiX Deepin you should use Refracta Installer. Using Deepin Installer some necessary packages (including Deepin Installer and Refracta Snapshot) will be removed during the installation process.
NOTE2: You can remaster (i.e. make your own live installable Deepin version) of ExTiX while running ExTiX live (i.e. from a USB stick or a DVD) if your computer has plenty of RAM. I could do that on a computer with 32GB RAM. I then started ExTiX live from RAM.
10. VirtualBox Guest Additions are pre-installed. With those installed you can run ExTiX in full screen in VirtualBox. Watch this screenshot.

UNIQUE
I may add that there is no other live version of Deepin 20.8.

SCREENSHOTS
1. ExTiX running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. ExTiX Deepin 20.8 Desktop
3. ExTiX 22.12 is running in VMware
4. Showing Deepin App Store
5. Showing Deepin Control Center
6. ExTiX running in Qemu in Linux (Ubuntu). NOTE: ExTiX Deepin (and other Linux systems) runs very fast in Qemu (in Linux). Qemu is a generic and open source machine emulator and virtualizer. Superior to VirtualBox…


Please read (and watch) a full enthusiastic review of ExTiX 22.12…

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

SlackEX (Slackware 15.0) live with LXQt 1.2 (latest), Refracta Snapshot and kernel 6.0.10-amd64-exton :: Build 221214

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS 221214 ABOUT SlackEX 15.0 with LXQt 1.2
Because I like Slackware so much I’ve made a new extra version of SlackEX 15.0. This time with LXQt 1.2 (latest version, released 221105) as Desktop environment. LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. LXQt is not included in Slackware’s repositories. I’ve built the LXQt 1.2 packages following the instructions at Gitlab.com. I.e. I’ve used a script made by lancsuk. If you already have Slackware/SlackEX installed to hard drive you can do the same. (If you want LXQt). It’s very easy if you have KDE installed. Otherwise you’ll have to install some KDE/LXQt dependencies. Not that difficult though. So SlackEX Build 221214 is a live remaster of Slackware 15.0 stable. It was released 220203. You can install SlackEX to hard drive and also use Refracta Snapshot for creating your very own live installable Slackware 15.0 system. Kernel 6.0.10-amd64-exton-rt14 is used. You can (of course) install Slackware’s latest kernel 5.19 if you want. But to be able to create your own Slackware 15.0 system you will have to use (boot up with) kernel 6.0.10-amd64-exton-rt14. Study all pre-installed packages in Build 221214.
NOTE1: You’ll run SlackEX Build 221214 as root or as the ordinary user user. The password for root is root. The password for user is live.
NOTE2
: You can run SlackEX Build 221214 on UEFI and non-UEFI computers. You can also run SlackEX live super fast from RAM.
NOTE3: VirtualBox Guest Additions and are pre-installed, which means that you can run SlackEX in full screen in VirtualBox. Watch this screenshot…

SCREENSHOTS
Screenshot 1 – root’s Desktop when Refracta Snapshot has started – LXQt
Screenshot 2 – user’s Desktop – LXQt
Screenshot 3 – SlackEX running in full screen in VirtualBox
Screenshot 4 – Showing chroot/grub during a hard drive installation

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

SlackEX (Slackware 15.0) with Enlightenment 0.25.4, Xfce 4.16.1, Refracta Snapshot and kernel 6.0.10-exton :: Build 221210

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX 15.0 stable Build 221210 with the Enlightenment 0.25.4 and Xfce 4.16.1 Desktops
A new extra version of SlackEX is ready. It is based on Slackware 15.0 stable released 220203. In this version I’ve installed Enlightenment 0.25.4 (latest version) and Xfce4. I’ve also replaced kernel 5.16.0-exton with kernel 6.0.10-amd64-exton-rt14. This version of SlackEX is unique. You can’t find another Linux system with the latest Enlightenment version. (Except for ExLight). When installing version 0.25.4 in SlackEX I had to do it from source. The whole thing was very time consuming since a lot of dependencies had to be satisfied. The most important package installed is Refracta Snapshot. With that you can build your own Slackware distribution with Enlightenment 0.25.4. When a new version of Enlightenment is ready you too should be able to install it from source. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. You can easily switch from Enlightenment to Xfce4 by editing /root/.xinitrc. Then log out and back again. That can of course also be done when running SlackEX live. (From a DVD or a USB stick). This Build of SlackEX replaces version 220117.
NOTE1: You’ll run SlackEX Build 221210 as root. The password for root is root. If you don’t like to run a Linux system as root you can create a “normal” user. Watch this screenshot.
NOTE2: You can’t login to Enlightenment 0.25.4 if you use older computers. It’s the same problem as in ExLight. You’ll have to use a fairly new computer if you want to see the Enlightenment Desktop. If you can’t login to Enlightenment (because your computer is too old) you can always switch to Xfce4. Press Ctrl Alt F1 simultaneously. Then edit .xinitrc with Nano. Command: nano .xinitrc. After that run the command startx and you will enter the Xfce4 Desktop.
NOTE3: You can run SlackEX Build 221210 on UEFI and non-Uefi computers. You can also run SlackEX live super fast from RAM.
NOTE4: VirtualBox Guest Additions and are pre-installed, which means that you can run SlackEX in full screen in VirtualBox.

SCREENSHOTS
Screenshot 1 – root’s Desktop – Enlightenment 0.25.4
Screenshot 2
root’s Desktop with Xfce4 as DE
Screenshot 3 – SlackEX running in full screen in VirtualBox

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!