Tag Archives: Ubuntu 18.10

RaspEX based on Ubuntu 18.10 with LXDE, kernel 4.14.76-v8+ (64 bit), Raspotify, RealVNC, PuTTy, Samba and Bluetooth – Build 181022

NEWS 181022
I’ve made an extra version of RaspEX LXDE. RaspEX Build 181022 uses a 64 bit kernel – 4.14.76-v8+. You can very easy switch back to the original 32 bit kernel (4.14.74-v7+) if you don’t find the 64 bit kernel useful. Since the Raspberry Pi 3 Model B and B+ only have 1GB RAM it’s perhaps useless to run a 64 bit kernel, but who knows…

View all installed packages in RaspEX – Build 181022

First things to do after installing RaspEX Build 181022
1. You won’t be automatically logged in to LXDE because the system is “full” (100 %). Log in to LXDE from Slim’s login page as root with password root.
2. Start up a terminal and run the command sh resize_rootfs.sh. Before that you can’t do anything because the system is full as this screenshot shows. After that all the space on the SD card will be used. Everything will be alright then.
3. Run the command dphys-swapfile setup
A SWAP file of 2 GB will be created. Then run the command dphys-swapfile swapon. Very useful if you want to run many programs at the same time.

When you have done step 1 – 3 you can use RaspEX Build 181022 in the same way as Build 181015. If you (for some reason) don’t like the 64 bit kernel (4.14.76-v8+) you can very easy change back to the original 32 bit kernel. Just edit /boot/config.txt to look like this (in relevant parts) and reboot your Raspberry Pi.

#####################################################
### 64 bit exton 181022
#device_tree=dtbs/4.14.76-v8+/broadcom/bcm2710-rpi-3-b-plus.dtb
#overlay_prefix=dtbs/4.14.76-v8+/overlays/
#kernel=kernel8.img
### end exton

### 32 bit exton 181022
kernel=kernel7.img
# end exton
#####################################################

Another good thing is that Ubuntu 18.10 now has been released in a stable version. All packages in RaspEX Build 181022 are (of course) in latest version as of 181022.

READ MORE…

RaspEX based on Ubuntu 18.10 with LXDE, kernel 4.14.74, Raspotify, RealVNC, PuTTy, Samba and Bluetooth – Build 181015

NEWS 181015 about RaspEX with LXDE based on (upcoming) Ubuntu 18.10
I have upgraded the whole system and replaced the old kernel 4.14.30-v7+ with kernel 4.14.74-v7+. RaspEX Build 181015 is a Linux ARM system for Raspberry Pi 3 Model B, 3 Model B+ and Raspberry Pi 2. It is based on Debian 9 Stretch, (upcoming) Ubuntu 18.10 Cosmic Cuttlefish and Linaro (Open Source software for ARM SoCs). In this new version (181015) I’ve installed Wicd Network Manager. Both Firefox ESR and Chromium are pre-installed. I have also installed Samba and RealVNC so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos), PulseAudio for better sound in YouTube and RaspotifyRaspotify is a Spotify Connect client for Raspbian on the Raspberry Pi  that just works. Study all installed packages in RaspEX Build 181015.

Raspberry Pi 3 Model 3 B+: How much better is it than the Raspberry Pi 3 Model B? The tiny computer is supposed to be faster and better in every way, including upgraded processor speed, wireless internet, and Ethernet connections.

Softpedia review
RaspEX version 181010 with BunsenLabs was reviewed by Softpedia 181010.

Compatibility :: October 2018

Unfortunately not all systems made for Raspberry Pi 3 and 2 will run on the new Raspberry Pi 3 Model B+ computer. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspEX BunsenLabs, RaspAnd Marshmallow, RaspAnd Nougat 7.1.2, RaspAnd Oreo 8.1 and RaspArch. I have until now (181015) upgraded RaspEX, RaspEX with OpenCPN, RaspArch and RaspAnd Oreo 8.1. Read about the new Raspberry Pi 3 Model B+…

How to use Raspotify
Raspotify (Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi
that just works) is pre-installed and immediately ready for connections. You’ll need a
Spotify Premium account in order to connect to for example your mobile phone running Spotify.
1. Screenshot of my mobile phone showing Devices available when RaspEX is running
2. Screenshot of my mobile phone showing the possibility to connect to Raspotify
3. Screenshot of my mobile phone when Raspotify is connected and running

THE IMPORTANCE of RaspEX LXDE now being based on Ubuntu 18.10 (UNSTABLE/DEVELOPMENT)

I don’t think it is too important since RaspEX doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs won’t crash or anything like that. And I haven’t discovered any bugs to report. Besides Ubuntu 18.10 will be released 181018 in a stable version. The FinalFreeze was already 181011 though.

SCREENSHOTS
Screenshot 1 – root’s Desktop 181015
Screenshot 2 – raspex’s Desktop 181015
Screenshot 3 – RaspEX connected to Windows via Samba
Screenshot 4 – RaspEX connected to Windows via PuTTy
Screenshot 5 – RaspEX “running on” Windows with VNC-viewer
Screenshot 6 – RaspEX using Pavucontrol (for sound control)
Screenshot 7 – RaspEX running SMPlayer
Screenshot 8 – RaspEX running the Bluetooth Manager
Screenshot 9 – RaspEX running Raspotify
Screenshot 10 – Resizing system and creating SWAP space

READ MORE…

ExTiX 18.10 – based on Ubuntu 18.10 “Cosmic Cuttlefish” – with LXQt 0.13.0, Refracta Tools, Calamares Installer and kernel 4.18.12-exton – a non-efi Build 181006

I have made a new extra version of ExTiX – The Ultimate Linux System. I call it ExTiX 18.10 LXQt Live DVD. It is for non-efi computers and VirtualBox/VMware. I.e. you can use the Calamares Installer also in for example VirtualBox and VMware. Which means that you can install ExTiX in any language.

ABOUT
ExTiX 18.10
LXQt DVD 64 bit is based on Debian and upcoming Ubuntu 18.10 Cosmic Cuttlefish (to be released 181018). The original system includes the Desktop Environment Gnome. After removing Gnome I have installed LXQt 0.13.0. LXQt is the Qt port and the upcoming version of LXDE, the Lightweight Desktop Environment. It is the product of the merge between the LXDE-Qt and the Razor-qt projects: A lightweight, modular, blazing-fast and user-friendly desktop environment. NOTE: This ExTiX LXQt Build is for installation to non UEFI-enabled computers and VirtualBox/VMware.

The system language is ENGLISH.

Used KERNEL
My special kernel 4.18.12-exton corresponding Kernel.org’s latest stable kernel 4.18.12. You can download “my” kernel if you want to use it another Ubuntu/Debian system.

What’s new in kernel 4.18?

WHAT’S SO SPECIAL about ExTiX and especially the new version from 181006?
1. The ExTiX ISO’s are ISO-hybrids, which means that they can very easily be transferred (copied) to a USB pen drive. You can even run ExTiX from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
2. Another big improvement is that both ExTiX versions can run from RAM. Use Boot alternative 4 (Load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExTiX that way. Running from RAM means that the system will run faster than from DVD or USB stick. Everything will be superfast I would say!
3. All packages have been upgraded to the latest version by 181006.
4. You can install that you can install Nvidia’s proprietary graphics driver (without problems) if you like.
5. You can install ExTiX to hard drive using Calamares Installer on older non-efi computers (and VirtualBox/VMware). Which means that you can install ExTiX in your preferred language.
6. While running ExTiX LXQt 18.10 live or from hard drive you can use Refracta snapshot (pre-installed) to create your own live installable Ubuntu system. A ten year child can do it!

THE IMPORTANCE of ExTiX LXQt now being based on Ubuntu 18.10 (UNSTABLE/DEVELOPMENT)
I don’t think it is too important since ExTiX LXQt doesn’t use complicated Desktop Environments like KDE, Gnome or Unity. Programs won’t crash or anything like that. And I haven’t discovered any bugs to report.

SCREENSHOTS
Screenshot of ExTiX 18.10 root Desktop – LXQt 0.13.0
Screenshot of ExTiX 18.10 live Desktop – LXQt 0.13.0
Calamares running in VMware in ExTiX 18.10
Refracta tools running while logged in as user live
Connections to Windows computers via PCManFM-qt using Samba
ExTiX running in VMware
ExTiX running in VirtualBox

READ MORE…


Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX Oreo 8.1!

and

about my Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Oreo 8.1!