Tag Archives: 64 bit

exGENT (Gentoo) 64 bit Linux Live DVD with kernel 4.4 – Build 160123

gentooNEWS 20160123 ABOUT exGENT
I’ve made yet a new version (20160123) of exGENT based on Gentoo Linux. Now with Xfce 4.12.1 and kernel 4.4. It’s for the 64 bit architecture. I call it exGENT 2016 Xfce4 Live DVD. It replaces version 20141227. The ISO file is of 2280 MB due to the fact that this version has a lot of packages pre-installed. Among them two different Web Browsers: Firefox and Opera. Despite this exGENT version 160123 runs surprisingly fast from DVD or USB. Even in VirtualBox. Faster than most other Linux live systems. All installed packages in exGENT have been updated to the latest available version by 160123.

Used KERNEL
My special kernel 4.4.0-gentoo-exton corresponding Kernel.org’s kernel 4.4. It’s the latest stable kernel as of now.

What’s new in kernel 4.4?

Programs etc
The best thing with exGENT is the premier auto detection of hardware and the ability to easily install the system to hard drive during a live session. Installed programs: Among many others GParted, GNU Emacs, Firefox, Thunderbird, Samba, AbiWord, Nvidia Graphics driver 352.63 and NetworkManager. Furthermore compilation tools so that you can install programs from source the Gentoo way. (After the installation to hard drive).

Quick install to Hard Drive
exGENT Linux can be installed to hard drive in 3 – 10 min. (Depending on computer type). This means that all of you who might hesitate to perform a normal Gentoo installation – which can take up to a couple of days – now have the chance to get this great Linux system (Gentoo) installed on your computers very easy.

UPGRADE the System

The exGENT System (version 160123) is in very good shape, since I, without problems, have been able to update the whole system with the following commands:
# emerge –ask –update –newuse –deep –with-bdeps=y @world
# emerge –depclean
# revdep-rebuild
(Since I haven’t upgraded exGENT since 20141227 it now took me four (4) days to upgrade/compile all included packages).

SPOTIFY
You can easy and quick install Spotify in exGENT. Just run the command emerge spotify. The installation takes about 1 min.

Who is exGENT/Gentoo for?
Experienced Linux users or those who really want to learn Linux.

What happened to the 32 bit version?
Please note that the 32 bit version of exGENT from December 2014 won’t be upgraded. I have deleted the ISO file from the servers. Almost no downloads! I guess 32 bit Linux systems are out of fashion nowadays.

Screenshots
exGENT running Audacity
exGENT running Brasero
exGENT running Samba
exGENT running Spotify

READ MORE…

Run your Slackware 64 bit system with the latest stable kernel – 4.3.1!

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.3.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.3.1 is the latest stable kernel available from Kernel.org. Released yesterday (20151209).

What’s new in kernel 4.3.1?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.3.1-x86_64-exton.txzmd5sum
2. Install it with the command installpkg linux-kernel-4.3.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.3.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

Run your Slackware 64 bit system with the latest stable kernel – 4.2.2!

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.2.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.2.2 is the latest stable kernel available from Kernel.org. Released 20150929.

What’s new in kernel 4.2?
One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.2.2-x86_64-exton.txzmd5sum
2. Install it with the command installpkg linux-kernel-4.2.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.2.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

Run your Slackware 64 bit system with the latest stable kernel – 4.1.1!

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.1.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.1.1 is the latest stable kernel available from Kernel.org. Released 20150629.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.1.1-x86_64-exton.txzmd5sum
2. Install it with the command installpkg linux-kernel-4.1.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.1.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

linux-logo-exton-black-white-bg-www

Exton|Defender with Cinnamon 2.4.8 – based on Fedora 22

exton-defender-fc22-screenshot-2-small NEWS 150531 re. Exton|Defender fc22 (Fedora 22)

I’ve made a new version of Exton|Defender 64 bit. Now based on Fedora 22, released 150526. It uses Cinnamon 2.4.8 and kernel 4.0.4.

Unique?
As far as I know there is no other live Fedora 22 cd/dvd out there with the Cinnamon Desktop.

System Tools included
NTFS-3g, GParted, PartImage, Sfdisk (util-linux-ng 2.21.2), Rsync, Ddrescue, FSArchiver, TestDisk and Midnight Commander. Other programs (among many others): Google Chrome (for watching Netflix movies), LibreOffice, NetworkManager, Firefox, Thunderbird, Gimp, Samba, Java (JDK 7u9) and Java Runtime Environment (JRE), Emacs, Safecopy, kernel headers and many compilation tools. See a complete LIST of all installed packages 150531.

READ MORE…

Run your Slackware 64 bit system with the latest stable kernel – 4.0.4!

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.0.4-x86_64-exton has even more support for new hardware, etc. Kernel 4.0.4 is the latest stable kernel available from Kernel.org. Released 20150517.

What’s new in kernel 4.0?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.0.4-x86_64-exton.txzmd5sum
2. Install it with the command installpkg linux-kernel-4.0.4-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.0.4-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

linux-logo-exton-black-white-bg-www