Tag Archives: LightDM

ExTiX Deepin 23.9 Live based on Deepin 23 BETA (latest) with Refracta Snapshot and kernel 6.5.0-extix-amd64-desktop-hwe :: Build 230903

NEWS 230903 ABOUT ExTiX with Deepin 23 BETA
I’ve released a new version of ExTiX Deepin today (230903). The previous ExTiX Deepin 23 version is from 230403. This ExTiX Build is based on Deepin 23 BETA (latest version) released by Deepin Technology in May 2023. Please read the Release Notes. As you can see the developers urge people to try Deepin BETA in a non-production environment! I must say, though, that I haven’t discovered any “bugs”. And the installed programs won’t “crash” or anything like that. On the contrary ExTiX Deepin 23.9 with the Deepin DE 23 works pretty well I would say. I have nevertheless kept ExTiX 22.12 with Deepin 20.8 on the server. Deepin 20.8/20.9 is the stable version released 221208. ExTiX 23.9 uses kernel 6.5.0-extix-amd64-desktop-hwe. ExTiX 23.9 works in the same way as all other ExTiX versions. I.e. you can install it to hard drive while running the system live. Use Refracta Installer for that. You can also create your own live installable Deepin 23 system with Refracta Snapshot. (Using ExTiX 23.9 as a “base system”). So easy that a ten year old child can do it!

Used KERNEL

My special kernel 6.5.0-extix-amd64-desktop-hwe corresponding Kernel.org’s kernel 6.5.

What’s new in Linux kernel 6.5

Upgrade Deepin 23 to BETA 2 or to the stable 23 version of Deepin
Future upgrades are very easy to perform. Just run the command sudo apt update followed by sudo apt upgrade. The BETA 2 version of Deepin will be released later in September 2023.

Please read (and watch) a full enthusiastic review of ExTiX 22.12 with Deepin 20.8…

SCREENSHOTS
1. ExTiX 23.9 running in full screen in VirtualBox (VirtualBox Guest Additions are pre-installed)
2. ExTiX Deepin 23.9 Desktop
3. ExTiX 23.9 running Refracta Snapshot
4. ExTiX 23.9 LightDM Login Screen

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

EXTON OpSuS Tumbleweed (openSUSE) 64 bit LXQt 1.2 UEFI Linux Live System – Build 230212

EXTON OpSuS Tumbleweed is based on openSUSE Tumbleweed, which is a rolling distribution. I.e. no need for new installations. Just run the command sudo zypper dup and you will always get the latest stable packages/kernels. The ISO file is only of 1430 MB so you will run the system very fast from a DVD or a USB stick. Even in VirtualBox/VMware directly from the ISO file.

ABOUT EXTON OpSuS for PC’s
EXTON OpSuS Tumbleweed with LXQt 1.2 uses kernel 6.1.10-1. Installed programs: Among many other programs, Firefox, NetworkManager, GParted and Calamares Installer. You’ll run the system as root from the beginning. Root’s password is linux. EXTON OpSuS can easily be installed to hard drive (of those who so desire). For that you shall use Calamares Installer. All programs have been updated to the latest available version as of February 10, 2023.
NOTE1
: If you run EXTON OpSuS on a non-UEFI computer or in VirtualBox/VMware you’ll get a chance to create an ordinary user before you enter the desktop. And also change the password for root. You will see this screen when the boot process is ready.
NOTE2: If you run EXTON OpSuS on a UEFI computer you will (probably) end up in console mode. Log in as root with password linux. Then run the command startx. You will then enter the LXQt 1.2 Desktop. If you do not see a login prompt you shall press Ctrl Alt F2 simultaneously.

The system language is English
.

Enjoy persistence when running the system from a USB stick
You must use the dd-command to achieve persistence. Read about it on the INFO site,

Is EXTON OpSuS LXQt Build 230212 unique?
If you have a look at openSUSE’s official Download site you can see that there is no live LXQt version available.

Why should someone choose EXTON OpSuS/openSUSE?

SCREENSHOTS
1. The LXQt 1.2 Desktop
2. Running EXTON OpSuS in full screen in VirtualBox
3. Running a zypper command
4. Login from LightDM

READ MORE…

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

Yet another version of RaspEX Kodi 32-bit :: Now with the LXQt Desktop and Kodi 19 “Matrix” stable with the Netflix addon – Build 210301

NEWS 210301 about RaspEX Kodi
I’ve made a new extra version of RaspEX Kodi 32-bit. This version is based on Raspbian (Raspberry Pi OS) and Debian Bullseye (upcoming Debian 11). The LXDE Desktop is replaced with LXQt 0.16.0 which has a more “modern look” than LXDE. Historically, LXQt is the product of the merge between LXDE-Qt, an initial Qt flavour of LXDE, and Razor-qt, a project aiming to develop a Qt based desktop environment with similar objectives as the current LXQt. In RaspEX Kodi Build 210301 I’ve upgraded Kodi to version 19.0 Matrix since it has reached the “stable stage” . It was therefore now possible to install the Netflix addon among many other addons. You can now also much easier install extra repositories. Read about the best Kodi repos 2021.

Boot problems as regards RaspEX Kodi Build 210301

If you can’t boot up the system after installing to the SD card using Rufus 3.13 in Windows it’s because the files /boot/cmdline.txt and /etc/fstab has the wrong content. I.e. the PARTUUID for the card is wrong. Then you’ll have to edit said files. Do it like this.
1. Start up a Linux system (Ubuntu or…).
2. Insert your SD card with RaspEX Kodi installed. It will be seen as /dev/sdb1 (boot partition) and /dev/sdb2 (root filesystem).
3. To find out the correct PARTUUID for /dev/sdb1 and /dev/sdb2 run the command blkid /dev/sdb1 respectively blkid /dev/sdb2
4. Now change to the correct PARTUUID in /boot/cmdline.txt and /etc/fstab on the SD card. Use Leafpad or Mousepad for that. Never LibreOffice writer!

The file cmdline.txt can look like this:
console=serial0,115200 console=tty1 root=PARTUUID=347a28ab-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

The file fstab can look like this:
proc /proc proc defaults 0 0
PARTUUID=347a28ab-01 /boot vfat defaults 0 2
PARTUUID=347a28ab-02 / ext4 defaults,noatime 0 1
# a swapfile is not a swap partition, no line here
# use dphys-swapfile swap[on|off] for that

Study all installed packages in Build 210301…

Log in to LXQt or Kodi
After the boot process is ready you will end up at LightDM‘s login screen. It will look like this – see below. Log in as pi with password raspberry or as root (“other”) with password root. You can log in to Kodi directly from LightDM if you want. While inside LXQt you can change to the Kodi Desktop environment. You can run Kodi on the LXQt Desktop like any other program or run it in full screen. Just change Kodi’s Settings from Windowed to Fullscreen. Watch this screenshot.

Expand the filesystem on the SD card
If you install many new big programs and/or download large files (for example videos) you may run out of space on the SD card. That is best fixed by running the following command: sudo raspi-config. Click on “Advanced Options” and choose A1 Expand Filesystem.
NOTE: That’s all you have to do. Just wait for the script to fix everything. If you use a SD card of 64 GB all the space on it will be used afterwards. Watch a screenshot when raspi-config is running.
1. Screenshot showing filesystem size before resizing
2. Screenshot showing filesystem size after resizing

Used kernels
5.10.17-exton-v7l+ (for Rpi 4) and 5.10.11-v7+ (for Rpi 3 and 2).

SCREENSHOTS
1. The LXQt Desktop running as user pi
2. The LXQt Desktop running as root

3. Kodi 19.0 system info
4. Kodi running on/within the LXQt Desktop
5. Kodi showing some addons
6. NBC Sport addon running
7. NASA addon running
8. Netflix addon running
9. Kodi running using a special skin

READ MORE…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and

about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se
– latest is RaspAnd 11 (without GAPPS) and RaspAnd Oreo 8.1 (with GAPPS)!

RaspEX Kodi Rpi3 with LXDE/OSMC Desktops and Kodi 18 RC5 Media Center “Leia” with Netflix, Plex and Amazon Video addons – Build 190117

ABOUT RaspEX Kodi
RaspEX Kodi Build 190117 with LXDE/OSMC Desktops is made especially for the new Raspberry Pi 3 Model B+, but can of course also be used on a Raspberry Pi 3 Model B and a Raspberry Pi 2 Model B. OSMC is based on Debian and Kodi Media Center. In RaspEX Kodi I’ve added the LXDE Desktop with many useful applications such as Wicd and NetworkManager. Makes it easy to configure your wireless network. I’ve also upgraded OSMC to a BETA version (Kodi 18 RC5 Leia), which makes it possible to include useful addons such as Netflix, Plex and Amazon Video. Which I’ve done. Kodi 18 RC5 was released 190114. Study all included packages in RaspEX Kodi.

Kernel
Kernel 4.20.1-exton is used.

RaspEX Kodi performance

RaspEX Kodi is a very fast and responsive Rpi system. Much due to very low memory (RAM) usage. About 100 MB as this screenshot shows. I’ve said that RaspEX LXDE Build 181015 is very fast. RaspEX Kodi with OSMC Desktop is even faster especially if you use the new Raspberry Pi 3 Model B+ to run it. The video and sound quality is also very very good. Even while running RaspEX Kodi on big TV screens. I.e. you can really enjoy Netflix and YouTube running on your Rpi mini computer!

SCREENSHOTS
1. Running Kodi
2. The LXDE Desktop logged in as the ordinary user osmc
3. The LXDE Desktop logged in as root (superadmin)
4. Netflix running showing very good video quality – 1
5. Netflix running showing very good video quality – 2
6. YouTube running showing very good video quality
7. Choosing program addons in Kodi
8. RaspEX Kodi OSMC running INFO

DOWNLOAD
This RaspEX build can’t be downloaded anymore. I have, h
owever, made a replacement for Build 190117.
RaspEX Kodi Build 190124 is a replacement for RaspEX Kodi with OSMC, which was released 190117. Sam Nazarko (founder of OSMC) contacted me 190118 claiming that I was “violating” his rights to the trademark OSMC and the rules in GPLv2. I don’t think I did, but I’m also very tired. Therefore I made a new version of RaspEX Kodi without any traces of OSMC. I would say that my new version is as good as the old one. I.e. excellent video and sound performance both in Kodi and LXDE.

READ MORE…