Tag Archives: SlackEX

Exton Linux distributions, LINUX

SlackEX (Slackware Current/14.2) with KDE 4.14.3 (latest) and kernel 4.4.1 (latest)

1 Comment

slackware_logoSlackEX is based on Slackware Current/14.2. Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. The older the fiddle the sweeter the tune or as we say in Sweden: Gammal är äldst.

New features in version 160203 of SlackEX
I have replaced kernel 4.3.1-x86_64-exton with kernel 4.4.1-exton-huge with support for “everything”. Most important is that I have changed repositories from Slackware 14.1 to Current. I.e. upcoming Slackware 14.2. KDE is upgraded to version 4.14.3 (latest KDE version). All other component software is also upgraded to the latest Slackware Current version by now. I may also mention in particular GParted 0.24.0 (latest, not in Slackware’s repositories), VirtualBox 5.0.14 (latest, not in Slackware’s repositories), Google Chrome 46.0.2490.86 (not in Slackware’s repositories), Gimp 2.8.10 (installed from source), GSlapt 0.5.3h, Firefox 43.0.4, Thunderbird 38.5, Samba 4.3.2 and GCC 5.3.0. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST. Note: I have replaced Wicd with NetworkManager. It works better.

Used kernel
4.4.1-exton-huge with support for “everything”. Kernel 4.4.1 was released 160131.

What’s new in kernel 4.4.1?

Nvidia
 Nvidia’s proprietary Graphics driver 352.79 (latest driver) is installed.

Install SlackEX to a USB stick
Please read my INSTALL INSTRUCTIONS. NOTE: All system changes are PERSISTENT.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware.

Screenshot 1 – KDE 4.14.3 Desktop with Netflix running

Screenshot 2 – KDE 4.14.3 Desktop with VirtualBox running

Screenshot 3 – Samba running

Screenshot 4 – GSlapt running

READ MORE…

Exton Linux distributions, LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.4.1!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware Current (14.2) and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.4.1-exton-huge has even more support for new hardware, etc. Kernel 4.4.1 is the latest stable kernel available from Kernel.org. Released 20160131.

What’s new in kernel 4.4.1?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.4.1-x86_64-exton-huge.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.4.1-x86_64-exton-huge.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.4.1-x86_64-exton-huge.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

Exton Linux distributions, LINUX

SlackEX (Slackware 14.1) Live DVD Build 151211 with KDE and kernel 4.3.1-x86_64-exton

Leave a comment

slackware_logoSlackEX is based on Slackware 14.1. Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993.

New features in version 151211 of SlackEX
I have replaced kernel 4.1.1-x86_64-exton with kernel 4.3.1-x86_64-exton with support for “everything”. KDE is downgraded to version 4.10.5 from version 4.11.1. All other component software is also upgraded to the latest Slackware version by now. I may mention in particular GParted 0.24.0 (latest, not in Slackware’s repositories), VirtualBox 5.0.10 (latest, not in Slackware’s repositories), Google Chrome 46.0.2490.86 (latest, not in Slackware’s repositories),  AbiWord 2.8.6 (not in Slackware’s repositories), Gimp 2.8.10 (installed from source), GSlapt 0.5.3h, Firefox 31.7, Thunderbird 31.6, Samba 3.6.8 and GCC 4.8.2. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware.

Screenshot 1 – KDE 4.10.5 Desktop

Screenshot 2 – KDE 4.10.5 Desktop

Screenshot 3 – Netflix running

READ MORE…

LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.3.1!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.3.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.3.1 is the latest stable kernel available from Kernel.org. Released yesterday (20151209).

What’s new in kernel 4.3.1?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.3.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.3.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.3.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.2.2!

1 Comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.2.2-x86_64-exton has even more support for new hardware, etc. Kernel 4.2.2 is the latest stable kernel available from Kernel.org. Released 20150929.

What’s new in kernel 4.2?
One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.2.2-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.2.2-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.2.2-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

exton-se-logo

Exton Linux distributions, LINUX

SlackEX 64 bit with KDE, kernel 4.1.1, Nvidia 352.21 and Google Chrome (for Netflix)

Leave a comment

SlackwareA new version of SlackEX is out today (150708). I have now included Nvidia’s Graphic driver 352.21, VirtualBox 4.3.28 and Google Chrome (for watching Netflix movies).

Used kernel
4.1.1-x86_64-exton.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. Gammal är äldst (The older the fiddle the sweeter the tune) as we say in Sweden.

READ MORE…

Exton Linux distributions, LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.1.1!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.1.1-x86_64-exton has even more support for new hardware, etc. Kernel 4.1.1 is the latest stable kernel available from Kernel.org. Released 20150629.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.1.1-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.1.1-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.1.1-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

linux-logo-exton-black-white-bg-www

Exton Linux distributions, LINUX

SlackEX 64 bit with KDE, kernel 4.0.4, Nvidia 346.72 and Google Chrome (for Netflix)

Leave a comment

SlackwareA new version of SlackEX is out today (150612). I have now included Nvidia’s Graphic driver 346.72 and Google Chrome (for watching Netflix movies).

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. Gammal är äldst (The older the fiddle the sweeter the tune) as we say in Sweden.

READ MORE…

Exton Linux distributions, LINUX

About SlackEX 14.1 64 bit build 150523

2 Comments

Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware 14.1, which I call SlackEX 14.1/current 64 bit Linux Live DVD, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore. Now we have the Application Managers Slackpkg and GSlapt – a GTK version of slapt-get. They are a piece of cake to use! Users of Synaptic will feel at ease with GSlapt.

New features in version 150523 of SlackEX
I have replaced kernel 3.18.1-x86_64-exton with kernel 4.0.4-x86_64-exton with support for “everything”. KDE is downgraded to version 4.10.5 from version 4.11.1. All other component software is also upgraded to the latest Slackware version by now. I may mention in particular GParted 0.17.0 (latest, not in Slackware’s repositories), VirtualBox 4.3.28 (latest, not in Slackware’s repositories), AbiWord 2.8.6 (not in Slackware’s repositories), Gimp 2.8.10 (installed from source), GSlapt 0.5.3h, Firefox 31.7, Thunderbird 31.6, Samba 3.6.8 and GCC 4.8.2. Furthermore I have installed Grub2, which can be used as boot loader (if you want) after a hard drive install. Study the full package LIST.

Why Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware.

Screenshot 1 – KDE 4.10.5 Desktop
Screenshot 2 – KDE 4.10.5 Desktop
Screenshot 3 – Netflix running

READ MORE…

LINUX

Run your Slackware 64 bit system with the latest stable kernel – 4.0.4!

Leave a comment

SlackwareI have compiled a very useful (as I think) 64 bit kernel for Slackware 12.0 – 14.1 and/or all Slackware derivatives. For example Slax, Zenwalk and SlackEX. The kernel is compiled exactly the same way as Slackware’s latest kernel huge. “My” kernel 4.0.4-x86_64-exton has even more support for new hardware, etc. Kernel 4.0.4 is the latest stable kernel available from Kernel.org. Released 20150517.

What’s new in kernel 4.0?

If you want to install my kernel in your Slackware 64 bit system, do this:

1. Download linux-kernel-4.0.4-x86_64-exton.txz – md5sum
2. Install it with the command installpkg linux-kernel-4.0.4-x86_64-exton.txz
(The kernel is packed just like Slackware’s original kernels so that everything ends up in the right place)
4. If necessary, change your Grub Legacy/Grub2 configuration
5. If you have an Nvidia graphics card in your computer, you may need to look over your files in /etc/modprobe.d before restarting the computer. That is remove the “blacklisting” of Nouveau’s kernel module in the appropriate files blacklist.conf and nvidia-installer-disable-nouveau.conf. With “my” kernel functions the Nouveau “free” driver works just fine.

NOTE: When you run the command installpkg linux-kernel-4.0.4-x86_64-exton.txz vmlinuz will be “created” in /boot. If you have /boot/vmlinuz already that file will be overwritten. In case you want to switch back to your old kernel you should make a backup of /boot/vmlinuz before you run the just mentioned command.

Restart your computer and enjoy!

linux-logo-exton-black-white-bg-www