Tag: Raspberry Pi 3 and 2

RaspArch Build 161205 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2 computer

rasparch-logoThis version (161205) is my fourth build of RaspArch
The first version is from 150414. The second is from 151107. The third is from 160312 specially made for the new Raspberry Pi 3. This version (161205) and version 160312 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and Gimp the system increased to 700 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B or Pi 2 computer.

NEWS in RaspArch Build 161205
A new kernel – 4.4.35-1-ARCH. All included packages have been updated to the latest version as of 161205. I have added support for Yaourt – a Pacman Fronted. I have also installed PulseAudio. Finally the sound works alright in RaspArch. Nice if you like YouTube. Note: To be able to install Yaourt I had to install a lot of development tools. In the first place I installed Yaourt to be able to install Google Chrome (only to learn that Google Chrome isn’t available for the ARM architecture).

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 4.4.35-1-ARCH and the LXDE Desktop environment.

BENEFITS of Arch Linux/RaspArch

“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop – YouTube and PulseAudio Control running
Screenshot of RaspArch’s Desktop – YouTube and Alsamixer running

READ MORE…

1 Comment Exton Linux distributionsLINUXRaspberry systems

RaspEX for Raspberry Pi 3/2 – Build 161019 – based on Ubuntu 16.10 with LXDE and kernel 4.4.21

raspberry-logoNEWS 161019 about RaspEX LXDE for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.1.20 with kernel 4.4.21. RaspEX Build 161019 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.6), Ubuntu Yakkety Yak (Ubuntu 16.10, released 161013) and Linaro (Open Source software for ARM SoCs). In this new version (161019) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 161019.

The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016.

Compatibility :: October 2016

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX with LXDE, RaspEX with Kodi, RaspEX with OpenCPN, RaspAnd Marshmallow, RaspAnd Lollipop and RaspArch. I have now (161019) upgraded all systems. Read about the new Raspberry Pi 3…

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry Pi on “steroids“. RaspEX Build 161019 and 160426 are (of course) even faster, especially if you run the systems on a Raspberry Pi 3 computer.

SCREENSHOTS
Screenshot 1 – RaspEX connected to Windows via Samba
Screenshot 2 – RaspEX connected to Windows via PuTTy
Screenshot 3 – RaspEX “running on” Windows with VNC-viewer
Screenshot 4 – RaspEX running Midori Private Browser
Screenshot 5 – RaspEX using Pavucontrol (for sound)
Screenshot 6 – RaspEX running SMTube (search and watch YouTube videos)

READ MORE…

No Comments Exton Linux distributionsLINUXRaspberry systems

Install RaspAnd Marshmallow 6.0.1 in Windows 10/8 very easy using Win32 Disk Imager!

win32diskimager-raspand-logoNEWS 160917 about RaspAnd Marshmallow 6.0.1 and Win32 Disk Imager
It is now possible to install RaspAnd Marshmallow Build 160915 to a Micro SD card (preferable a class 10 card) in Windows 10. I have finally (after many months) “discovered” how to make an image file of all four (4) partitions needed to run RaspAnd. I.e. system, boot, cache and data. Just download the ZIP-file raspand-marshmallow-6.0.1-gapps-install-win32diskimager-622mb-160915.zip and unzip it with 7-Zip. Then download Win32 Disk Imager (for free) and install the IMG-file raspand-marshmallow-6.0.1-gapps-7400mb-160915.img to a SD card of at least 8GB. It will look like this during the installation. Be sure to install to the right place so you don’t erase important data! You can alternatively (of course) use the dd-command in a Linux system. Unzip raspand-marshmallow-6.0.1-gapps-install-win32diskimager-622mb-160915.zip. Then open a terminal and run the command dd if=raspand-marshmallow-6.0.1-gapps-7400mb-160915.img of=/dev/sdX bs=1M
(Change X to b, d or…)

What’s the point with Win32 Disk Imager?
Well, until now you had to have some basic knowledge about Linux to be able to install RaspAnd. Now you don’t need any special knowledge at all! (Just some basic computer knowledge).

ABOUT
RaspAnd Marshmallow Build 160915 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. Google Play Store and other GAPPS are included. This version of RaspAnd is faster and more responsive than RaspAnd Marshmallow 601 Build 160717 and (of course) RaspAnd Lollipop Build 150924/160315. Many other apps than GAPPS are pre-installed in Build 160915. I can mention Clash of Clans, Spotify, ES File Explorer, Rotation Control Pro,  Terminal Emulator, Aida64, WinZip and Vlc.

MORE ABOUT RaspAnd Marshmallow Build 160915
This new version has about the same pre-installed apps and features as in RaspAnd Marshmallow Build 160717, but it looks better, runs faster and is more responsive. Watch the slideshow below. You can run also this build (160915) using a Raspberry Pi 2 computer, but for best performance you really should use a Raspberry Pi 3. Be sure also to use a class 10 Micro SD Card.

READ MORE…

No Comments AndroidExton Linux distributionsLINUXRaspberry systems

RaspAnd Marshmallow 6.0.1 Build 160915 for Raspberry Pi 3/2 – faster and more responsive than ever!

raspand-marshmallow-desktop2-160915-smallRaspAnd Marshmallow Build 160915 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. Google Play Store and other GAPPS are included. This version of RaspAnd is faster and more responsive than RaspAnd Marshmallow 6.0.1 Build 160717 and (of course) RaspAnd Lollipop Build 150924/160315. Many other apps than GAPPS are pre-installed in Build 160915. I can mention Clash of Clans, Spotify, ES File Explorer, Rotation Control Pro,  Terminal Emulator, Aida64, WinZip and Vlc.

ABOUT RaspAnd Marshmallow Build 160915
This new version has about the same pre-installed apps and features as in RaspAnd Marshmallow Build 160717, but it looks better, runs faster and is more responsive. Watch the slideshow below. You can run also this build (160915) using a Raspberry Pi 2 computer, but for best performance you really should use a Raspberry Pi 3. Be sure also to use a class 10 Micro SD Card.

About Aptoide App Manager and Google Play Store
I have removed Aptoide in this build (160915). I could not get Aptoide to work properly in this RaspAnd build. Google Play Store works very well though. I.e.: A lot of apps can be found and installed.

About the need to upgrade from RaspAnd Build 160717 to RaspAnd Build 160915

If you have RaspAnd Build 160717 “up and running” and everything works alright there is no real need to upgrade. I mean both versions are based on Marshmallow 6.0.1 and all included apps (GAPPS and others) gets updated all the time. RaspAnd Build 160915 runs slightly faster and looks better than Build 160717. That’s all! Note: RaspAnd Build 160717 has even one advantage over Build 160915. Namely that Aptoide App Manager is installed. Aptoide can be used to install apps not found on Google Play Store.

Screenshots
Screenshot 1 – Google Play Store running
Screenshot 2 – RaspAnd’s new Desktop

READ MORE…

1 Comment AndroidLINUXRaspberry systems

RaspEX for Raspberry Pi 3 and 2 with openCPN 4.4.0

raspex-16.04-opencpn-4.2.1-touchscreen-20160629-smallNEWS 160629 about RaspEX with OpenCPN pre-installed

The system is now based on Ubuntu 16.04 LTS. I’ve also upgraded OpenCPN to version 4.4.0. (Latest version). To my great joy also this version of RaspEX worked together with the 7″ Touchscreen Monitor for Raspberry Pi “out of the box”.

NOTE: Today’s version of RaspEX hasn’t been distributed yet.

SCREENSHOTS
OpenCPN 4.4.0 running
Samba (connection with my Windows computers in my network) running

No Comments Exton Linux distributionsLINUXRaspberry systems

RaspAnd 6.0.1 (Marshmallow) for Raspberry Pi 3 and Pi 2 Build 160625 with GAPPS, Wifi and Bluetooth working

raspand-20160625-clashofclans-smallRaspAnd Build 160625 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. I have finally managed to include Google Play Store and other GAPPS. This version of RaspAnd is faster and more responsive than RaspAnd Lollipop Build 150924/160315.

Wifi and Bluetooth support
This new version of RaspAnd has support for Wifi and Bluetooth (on Raspberry Pi 3). RaspAnd runs very well on the new Raspberry Pi 3 computer. The system runs also on the “old” Raspberry Pi 2 computer.

Installed apps
The following useful apps are pre-installed in RaspAnd Marshmallow: Google Play Store, Aptoide App Manager (as an alternative to Google Play Store), Terminal Emulator, Aida64, WinZip, ES File Explorer, Rotation Control Pro, Opera 36.2.2126, Spotify 5.6.0.674, Bluetooth File Transfer, YouTube and the popular (?) game Clash of Clans.

Screenshots

Screenshot 1 – Google Play Store running

Screenshot 2 – RaspAnd’s Desktop

Screenshot 3 – AIDA64 showing the system

Screenshot 4 – Clash of Clans running (very well)

Screenshot 5 – Wifi connection

Screenshot 6 – Bluetooth connection

Screenshot 7 – Setting permissions for Google Play Services

Screenshot 8 – Using ES File Explorer

Screenshot 9 – Using Opera Web Browser

READ MORE…

1 Comment AndroidExton Linux distributionsLINUXRaspberry systems