Tag: Android

Install RaspAnd Marshmallow 6.0.1 in Windows 10/8 very easy using Win32 Disk Imager!

win32diskimager-raspand-logoNEWS 160917 about RaspAnd Marshmallow 6.0.1 and Win32 Disk Imager
It is now possible to install RaspAnd Marshmallow Build 160915 to a Micro SD card (preferable a class 10 card) in Windows 10. I have finally (after many months) “discovered” how to make an image file of all four (4) partitions needed to run RaspAnd. I.e. system, boot, cache and data. Just download the ZIP-file raspand-marshmallow-6.0.1-gapps-install-win32diskimager-622mb-160915.zip and unzip it with 7-Zip. Then download Win32 Disk Imager (for free) and install the IMG-file raspand-marshmallow-6.0.1-gapps-7400mb-160915.img to a SD card of at least 8GB. It will look like this during the installation. Be sure to install to the right place so you don’t erase important data! You can alternatively (of course) use the dd-command in a Linux system. Unzip raspand-marshmallow-6.0.1-gapps-install-win32diskimager-622mb-160915.zip. Then open a terminal and run the command dd if=raspand-marshmallow-6.0.1-gapps-7400mb-160915.img of=/dev/sdX bs=1M
(Change X to b, d or…)

What’s the point with Win32 Disk Imager?
Well, until now you had to have some basic knowledge about Linux to be able to install RaspAnd. Now you don’t need any special knowledge at all! (Just some basic computer knowledge).

ABOUT
RaspAnd Marshmallow Build 160915 is an Android 6.0.1 Marshmallow system which can run on Raspberry Pi 3 and Pi 2. Google Play Store and other GAPPS are included. This version of RaspAnd is faster and more responsive than RaspAnd Marshmallow 601 Build 160717 and (of course) RaspAnd Lollipop Build 150924/160315. Many other apps than GAPPS are pre-installed in Build 160915. I can mention Clash of Clans, Spotify, ES File Explorer, Rotation Control Pro,  Terminal Emulator, Aida64, WinZip and Vlc.

MORE ABOUT RaspAnd Marshmallow Build 160915
This new version has about the same pre-installed apps and features as in RaspAnd Marshmallow Build 160717, but it looks better, runs faster and is more responsive. Watch the slideshow below. You can run also this build (160915) using a Raspberry Pi 2 computer, but for best performance you really should use a Raspberry Pi 3. Be sure also to use a class 10 Micro SD Card.

READ MORE…

No Comments AndroidExton Linux distributionsLINUXRaspberry systems

RaspAnd – Build 3 150924/160315 – with Google Play Store, now also for Raspberry Pi 3!

raspex-andex-logoNEWS about RaspAnd 160315
I have uploaded a new version of RaspAnd, which can run also on the new Raspberry Pi 3 computer. It is basically the same system as before. Only the boot parameters are changed.

About RaspAnd 150924
I have finally managed to include Google Play Store in RaspAnd and most important Google Play Services.

NEWS 150924
I have compiled yet another Android 5.1 Lollipop system which can run on Raspberry Pi 2. I call “my” new system RaspAnd Build 3. My first version of RaspAnd is from 150405 and my second from 150527. The following useful apps are pre-installed in Build 3 of 150924: Google Play Store, Aptoide App Manager (as an alternative to Google Play Store), Terminal Emulator, AIDA64, Geekbench, WinZip, FileManager, Rotation Control Lite, WPS Office and Offline Maps. Google Play Store, AIDA64 and Geekbench were not included in Build 2 from 150527.

SCREENSHOTS
Screenshot 1 – Google Play Store running

Screenshot 2 – RaspAnd’s Desktop

Screenshot 3 – Google Play Services updating

Screenshot 4 – Google Play Store update with Aptoide

READ MORE…

1 Comment AndroidExton Linux distributionsLINUXRaspberry systems

AndEX Marshmallow 6.0.1 with GAPPS and kernel-4.4.0-exton – Build 160220

andex-marshmallow-6.0.1-20160131-smallNEWS 160220 – New version
AndEX Marshmallow version 160131 has been replaced by version 160220. Included apps etc. are the same in the new version.

NEWS  – AndEX – Marshmallow 6.0.1 with kernel 4.4.0-exton and GAPPS
My build of Android-x86 Marshmallow 6.0.1 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Gmail, YouTube and more apps. For example: Aptoide, Google Chrome and Spotify. The ISO is called android-x86-6.0.1-marshmallow-kernel-4.4.0-exton-GAPPS-530mb-160220.iso. AndEX Marshmallow Build 160220 is totally error-free (as far as I know).

ABOUT Andex Marshmallow
My compiled Android-x86 system (Marshmallow 6.0.1) can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

LATEST ANDROID SYSTEM
Android 6.0.1 Marshmallow was released 151207.

More about AndEX Marshmallow
Marshmallow 6.0.1 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Marshmallow Live CD. It uses “my” special kernel 4.4.0-exton-android-x86 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2016-01-25 will also cost you 9 $. It has two advantages over the Marshmallow version: The system can be used also on older laptops and it runs very well in VirtualBox. Read more about the KitKat 4.4.4 version 160125 or DOWNLOAD it instantly.

Installing new apps in AndEX Marshmallow
Use Google Play Store or Aptoide Apps Store, which are pre-installed. Just make your choices…

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX Marshmallow Build 160220 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

Screenshots
Screenshot 1 – AndEX Desktop with Water Garden Live Wallpaper
Screenshot 2 – AndEX – The Desktop at first boot
Screenshot 3 – AndEX – The beginning of your configuration

READ MORE…

2 Comments AndroidExton Linux distributionsLINUX

Android-x86 KitKat 4.4.4 Build 8 with GAPPS, kernel 4.0.9-exton-android-x86, Bluetooth (working!) and Mesa 10.5.9

android-x86-kitkat-exton-160125-smallAndroid-x86 KitKat 4.4.4 Exton Build 160125, version 8, is a ready!
I’ve added Mesa (3D Graphics Library) 10.5.9 for better Graphic performance. The system can run live (from CD or a USB stick) on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can easily install the system to your hard drive and install new apps. You can also install new apps while running the system live. Google Play Store is pre-installed so you can just make your choices…

Used kernel
4.0.9-exton-android-x86.

Replacement
This version (Build 8) replaces all my previous (7) Android-x86 4.4.4 KitKat builds. In version 8 (as in version 7) I’ve added GAPPS. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps (for example Bluetooth File Transfer, Spotify and WPS Office). Everything just works.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Read my article About how useful an Android-x86 system can be for the average computer user.

Screenshots
The Japanese Koi Fish Desktop pic 1
Enable Bluetooth in Settings pic 2
Scanning for Bluetooth devices with Bluetooth File Transfer pic 3

READ MORE…

No Comments AndroidExton Linux distributionsLINUX

AndEX (Android-x86) 5.1.1 Lollipop with GAPPS and kernel 4.0.3 – Build 150611

andex-apps-20150610-smallNEWS 150611 – AndEX – Lollipop 5.1.1 with kernel 4.0.3 and GAPPS
My new build of Android-x86 Lollipop 5.1.1 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps. For example: Facebook, OfficeSuite 8 and Pool Break Lite (3D game). The ISO is called android-x86-5.1.1-lollipop-kernel-4.0.3-exton-GAPPS-556mb-150611.iso. AndEX 150611 is totally error-free. (This Lollipop version was released April 27, 2015). When running AndEX live you will get some error messages during the setup of your wireless connection and logging into your Google account, but nothing serious. For installing new apps you shall always use Google Play Store in AndEX build 150611. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

About AndEX

My compiled Androidx86 system (Lollipop 5.1.1) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX
Lollipop 5.1.1 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live CD. It uses “my” special kernel 4.0.3-exton-android-x86 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2015-06-06 will also cost you 9 $. I has two advantages over the Lollipop version: You can run the system in VirtualBox and the system can be used also on older laptops. Read more about the KitKat 4.4.4 version 150606 or DOWNLOAD it instantly.

Installing 3D games
I wrote an article 150608 about installing 3D games in my KitKat 4.4.4 Build 6. The same games can be installed in AndEX Build 150611. I have also tested Cars: Fast as Lightning and Trials Frontier in AndEX. Those apps ran without problems.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 150611 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

NOTE/WARNING
You must use a fairly new/modern computer. Android-x86 Lollipop won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 build 150606 will run also on older computers.

Screenshots
Screenshot 1 – AndEX Desktop with Rain Live wallpaper (pre-installed)
Screenshot 2 – AndEX showing all apps
Screenshot 3 – AndEX running Pool Break Lite in 3D
Screenshot 4 – AndEX running Cars: Fast as Lightning
Screenshot 5 – AndEX running Trials Frontier

READ MORE…

No Comments Exton Linux distributionsLINUX

AndEX (Android-x86 Lollipop 5.0.2) with GAPPS and kernel 4.0.0-exton-android-x86

lollipop-desktop-20150520-1-smallNEWS 150520 about AndEX – The Absolute Ultimate Edition
My new build of Android-x86 Lollipop 5.0.2 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google+, Maps, YouTube and more apps. The ISO is called android-x86-5.0.2-lollipop-GAPPS-kernel4-exton-687mb-150520.iso. I call it The Absolute Ultimate Edition because AndEX build 150520 is totally error-free. Google Maps is the only app you’ll have to update. (Just start Google Play Store and do it!). All other included apps work perfectly well! You shall always use Google Play Store in AndEX version 150520. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

About AndEX
My compiled Androidx86 system (Lollipop 5.0.2) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD (DVD) if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX

Lollipop 5.0.2 is the second latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live DVD. It uses “my” special kernel 4.0.0-exton-android-x86 with some extra features. I.e. extra drivers and NTFS read/write support. My Android-x86 KitKat 4.4.4 build from 2015-05-04 will also cost you 9 $. It has one advantage over the Lollipop version: You can run the system in VirtualBox. Read more about the KitKat 4.4.4 version 150504 or DOWNLOAD it instantly.

Installing new apps in AndEX Lollipop
Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices. Normally you should always use Google Play Store, but if you can’t find the app you are looking for you can try Aptoide.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

USB installation
Read my instruction. Learn how you can run AndEX from a USB stick with persistence. Read under A).

VirtualBox

Unfortunately you cannot (normally) run/test the system in VirtualBox. I.e. run it directly from the ISO file and install it to a hard drive created in VirtualBox. That can however be done if you use one of my other Android remaster KitKat 4.4.4 version 150504.

Screenshots
Screenshot 1 – AndEX Desktop without modifications
Screenshot 2 – AndEX Desktop with modifications

NOTE2/WARNING2
Before you buy and download this version of AndEX you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86 system. Some very big (around 1GB) games for example won’t run. Note about version 150520: While running The Absolute Ultimate Edition you won’t get any error messages.

READ MORE…

Android is a trademark of Google Inc.

1 Comment AndroidExton Linux distributionsLINUX

AndEX (Android-x86) Lollipop 5.0.2 with Google Play Store and other GAPPS – now (almost) error-free

andex-lollipop-5.0.2-20150426-360NEWS 150505 about AndEX – The Ultimate Edition
My new build of Android-x86 Lollipop 5.0.2 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google+, Maps, YouTube and more apps. The ISO is called android-x86-5.0.2-lollipop-GAPPS-exton-782mb-150505.iso. I call it The Ultimate Edition because AndEX 150505 is (almost) error-free. I finally managed to install Google Play Services, which is needed for Google Play Store to run. You shall always use Google Play Store in AndEX version 150505. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

Unique?
As far as I know there is no other Android-x86 Lollipop 5.0.2 version out there with GAPPS pre-installed.

View the boot process >> SLIDESHOW

About AndEX
My compiled Androidx86 system (Lollipop 5.0.2) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD (DVD) if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

Replacement
This Ultimate Edition of AndEX replaces version 150426, which also had GAPPS pre-installed.

READ MORE…

1 Comment AndroidLINUX

AndEX (Android-x86) Lollipop 5.0.2 with Google Play Store and other GAPPS

andex-lollipop-5.0.2-20150426-360NEWS 150426 ABOUT AndEX Lollipop 5.0.2
My new build of Android-x86 Lollipop 5.0.2 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google+, Maps, YouTube and more apps. The ISO is called android-x86-5.0.2-lollipop-exton-kernel-GAPPS-721mb-150426.iso. I finally managed to install Google Play Services, which is needed for Google Play Store to run. You shall always use Google Play Store in AndEX version 150426. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

Unique?
As far as I know there is no other Android-x86 Lollipop 5.0.2 version out there with GAPPS pre-installed.

View the boot process >> SLIDESHOW

About AndEX
My compiled Androidx86 system (Lollipop 5.0.2) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD (DVD) if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX
Lollipop 5.0.2 is the second latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live DVD. It uses “my” special kernel 3.10.58-exton-android-x86 with some extra features. I.e. extra drivers and NTFS read/write support. My Android-x86 KitKat 4.4.4 builds from 2015-03-21 will cost you 8 $ and my Android-x86 KitKat 4.4.4 build from 2015-03-30 7 $. They have two advantages over the Lollipop version: A newer kernel (3.18.8 respectively 3.18.2) is used and you can run the systems in VirtualBox. Read more about the KitKat 4.4.4 version 150321 or DOWNLOAD it instantly. Read more about the KitKat 4.4.4 version 150330 or DOWNLOAD it instantly.

Installing new apps in AndEX Lollipop
Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices. Normally you should use Google Play Store, but if you can’t find the app you are looking for you can try Aptoide.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 150426 almost all apps and games can be installed via Google Play Store.

Screenshots
Screenshot 1 – AndEX Desktop without modifications
Screenshot 2 – AndEX Desktop with modifications
Screenshot 3 – AndEX installed apps
Screenshot 4 – AndEX preventing rotation
Screenshot 5 – AndEX using Google Maps

READ MORE or download the ISO file instantly…

No Comments AndroidExton Linux distributionsLINUX

AndEX (Android) x86 5.0.2 Lollipop Live CD with kernel 3.10.58-exton-android-x86

Android logoI have compiled an Android x86 system (Lollipop 5.0.2), which can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

About AndEX
Lollipop 5.0.2 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live CD. It uses “my” special kernel 3.10.58-exton-android-x86 with some extra features. I.e. extra drivers and NTFS read/write support. My Android-x86 KitKat 4.4.4 build from 2015-03-21 will cost you 8 $ and my Android-x86 KitKat 4.4.4 build from 2015-03-30 7 $. They have three advantages over the Lollipop version: Aptoide App Manager respectively Google Play Store is pre-installed, a newer kernel (3.18.8 respectively 3.18.2) is used and you can run the systems in VirtualBoxRead more about the KitKat 4.4.4 version 150321 or DOWNLOAD it instantly. Read more about the KitKat 4.4.4 version 150330 or DOWNLOAD it instantly.

Installing new apps in AndEX Lollipop
Use Aptoid Apps Store, which is pre-installed. Just make your choices

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

USB installation
Read my instruction. Must be done if your computer lacks a CD drive.

NOTE/WARNING
You must use a fairly new/modern computer. Android x86 Lollipop won’t run (even start) on older computers. My other Android remasters KitKat 4.4.4 will run also on older computers.

Screenshots
Screenshot 1 – Andex Desktop without modifications
Screenshot 2 – Andex installed apps
Screenshot 3 – Andex preventing rotation
Screenshot 4 – Andex using Google Maps
Screenshot 5 Andex with modified Desktop
Screenshot 6 – Andex with modified Desktop

Softpedia’s review of AndEX (Android-x86) Lollipop 5.0.2

Note2: Android-x86 KitKat 4.4.4 Exton build 1, Exton build 2, Exton build 3 and Exton build 4 can run on many more laptops/computers than AndEX (Android-x86) Lollipop 5.0.2.

READ MORE or download the ISO file instantly for 7 $…

Note3: The AndEX Lollipop ISO has been out on SourceForge.net and the Swedish Linux Society for free since 150307 until today (150402). The ISO file has been downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

1 Comment Android

Android KitKat 4.4.4 x86 – Exton build – for laptops

Android logoI have compiled an Android x86 system (KitKat 4.4.4), which can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

Replacement for Windows, Mac or even Linux Desktop systems?
Some belive what I just said. The Android-x86 Project (Run Android on your PC) is about porting the Android Open Source Project to x86 platform. The Android-x86 Project’s latest release is Android-x86 4.4-r2 from 2015-01-01. The ISO file can be downloaded for free from SourceForge.net or Softpedia. My Android-x86 KitKat 4.4.4 build from 2015-03-01 will cost you 7 $.

Boot screen

Kernel
Kernel 3.18.2-android-x86+ is used.

Installing new apps
Google Play Store is pre-installed (among many other apps) so you can just go ahead and make your choices…

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler/loader during the installation of Android KitKat. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”
If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 4.4.4 KitKat 150301 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-03-01/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-01
initrd /android-2015-03-01/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add thease lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 150301 (sda8)
root (hd0,7)

kernel /android-2015-03-01/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-01
initrd /android-2015-03-01/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for my KitKat version.

VirtualBox
You can also (of course) run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc.

Screenshots
The boot screen
The welcome screen
The Desktop (after I have added a few apps)
All apps (after I have added a few)
Google Play Store is used
The file manager is used
Poweroff

Softpedia’s review of AndEX (Android-x86) Lollipop 5.0.2

Note that Android-x86 KitKat 4.4.4 Exton build 1 and Exton build 2 can run on many more laptops/computers than AndEX (Android-x86) Lollipop 5.0.2.

DOWNLOAD (android_x86-4.4.4-kitkat-exton-build-409mb-150301.iso)

md5sum


Android is a trademark of Google Inc.

No Comments Android