Tag Archives: LXDE

RaspArch Build 171102 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2 computer :: Install using Win32 Disk Imager!

rasparch-logoThis version (171102) is my fifth build of RaspArch
The first version is from 150414. The second is from 151107. The third is from 160312 specially made for the new Raspberry Pi 3. The fourth version is from 161205. This version (171102) and version 161205 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch
is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and Gimp the system increased a lot. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B or Pi 2 computer.

Most important change in version 171102: use Win32 Disk Imager for the installation
This version can be installed in Windows using Win32 Disk Imager. Previous versions could only be installed when running a Linux system. Using Win32 Disk Imager has one disadvantage though. Only about 1GB can be used as data storage no matter which card you use. The system is of 3GB and the system partition of 4GB. If you use a card of 32GB about 28GB will be unused. Yesterday a member on this site wrote about how to get rid of the 1GB limit after Win32 Disk Imager has been used:
– write the image with Win32 Disk Imager
– start up Ubuntu (or another Linux system)
– start GParted – screenshot before resizing
– resize the SYSTEM partition – screenshot after resizing
– done!
This screenshot shows that RaspArch now has about 25GB free storage.

Writing the image using Win32 Disk Imager. See the screenshot below.

Study all installed packages in RaspArch…

SCREENSHOTS
Screenshot 1 of RaspArch’s Desktop
– YouTube and PulseAudio Control running
Screenshot 2 of RaspArch’s Desktop – YouTube running
Screenshot 3 – Yaourt running (while installing Geany)

READ MORE…

CruxEX (CRUX 3.3), Build 170904, with LXDE, Google Chrome 60.0.3112, Firefox 55.0.3 and Nvidia 384.69

CruxEX 3.3 64 bit Linux Live USB is based on CRUX 3.3 (latest version, released 170212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86_64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.3 2017 uses the LXDE Desktop environment. I have replaced the original CRUX kernel with “my” special kernel 4.12.10-x86_64-cruxex, with support for “extra everything”.

Kernel etc
Kernel 4.12.10 is one of the latest available stable kernels as of 170904. Among all installed and updated applications are Firefox 55.0.3, Google Chrome 60.0.3112 (for Netflix), GParted, PCManFM, Gimp and Wicd. Furthermore compilation tools so that you can install programs from source. Note: Firefox 55.0.3 and  Google Chrome 60.0.3112 are not in the CRUX repositories.

NEWS 170904
CruxEX 2017 is distributed only as a Zip file. Install my new version of CruxEX 3.3 64bit from 170904 to a USB Pen Drive and save your system changes – read this INSTRUCTION. If you later on decide you want to install CruxEX to hard drive from the USB Pen Drive all your system changes will also be installed to the hard drive.

Unique
CruxEX 3.3 2017 build 170904 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading.

SCREENSHOTS
1. The  new CruxEX LXDE Desktop
2. Netflix running in Google Chrome
3. See Prt-get in action

READ MORE…

LFA (Linux For All) 64bit Build 170827 with Wine (for HBO Movies/Nordic), Google Chrome (for Netflix) and Refracta tools

About Linux For All (LFA) Build 170827
The system is based on Ubuntu 16.04.3 LTS and Debian Jessie. It’s a total rebuild. I.e. nothing is left of the old LFA system.

NEWS ABOUT LFA Build 170827
1. This is a very BIG system (2430MB). All packages the ordinary Linux user can wish for are pre-installed. Study the full packages list.
2. Kernel 4.12.0-12-exton (corresponding Kernel.org’s second latest stable kernel 4.12.8) is used. You can download “my” kernel and install it in another Ubuntu/Debian system (if you want).
3. I have installed Nvidia’s latest proprietary graphics driver 384.69.
4. The Desktop environment is LXDEDesigned to be user friendly and slim, while keeping the resource usage low.
5. The main Web Browser is Google Chrome. So you can watch Netflix!
6. I have installed Wine just to be able to install Firefox for Windows (which I have done). The Windows version is needed if you want to watch HBO Movies/HBO Nordic. The Pepper Flash plugin just doesn’t work anymore in Ubuntu. With Wine installed you can install many other Windows programs using PlayOnLinux. (Also pre-installed by me).
7. I have included Refracta tools (Refracta Snapshot) to make it possible for you to create your own installable Ubuntu (16.04.3/16.10/17.04/17.10) Live DVD once you have installed LFA to hard drive. This is done in the easiest possible way!

SCREENSHOTS
1. LFA Build 170827 running Firefox for Windows and HBO Movies
2. LFA Build 170827 running Wicd Preferences and sudo iwconfig
3. LFA Build 170827 running PlayOnLinux for installing Windows programs
4. LFA Build 170827 running Rufus and Wine
5. LFA Build 170827 running Samba to reach Windows computers
6. LFA Build 170827 running Google Chrome and Netflix

READ MORE…

 

DebEX Barebone Build 170822 with LXDE: Create you own Debian 9 “Stretch” system in the easiest possible way!

About DebEX Barebone, DebEX Gnome and DebEX KDE Linux 64 bit
All three systems/distributions are a based on Debian. DebEX KDE is based on Debian Jessie (Debian 8). DebEX Barebone and DebEX Gnome are based on Debian 9 (Stretch) and Debian unstable (Sid). LXDE is used as Desktop environment in DebEX Barebone. Gnome 3.22 and Mate 1.16 are used in DebEX Gnome. KDE 4.14.2 and KDE Plasma Desktop 5:84 are used in DebEX KDE. DebEX Barebone LXDE uses my special kernel 4.12.0-12-exton. (Kernel 4.12.8 – latest stable kernel). DebEX Gnome uses my special kernel 4.8.0-21-exton. (Kernel 4.8). DebEX KDE uses my special kernel 4.8.0-18-exton. (Kernel 4.8-rc8). The system language is English (in all three versions of DebEX).

NEWS 170822 about DebEX LXDE – a Refracta Build
A new version of DebEX Barebone with LXDE and kernel 4.12.0-12-exton (equivalent to Kernel.org’s latest stable kernel 4.12.8) is ready. All packages have been updated to the latest version as of August 22, 2017. DebEX Barebone is now based on Debian 9 Stretch and Debian unstable – Sid. I have replaced Google Chrome with Firefox 55.0.2 (for Netflix).

What’s new in kernel 4.12?

Important about Refracta
You can use the Refracta tools (pre-installed in DebEX LXDE) to create your own installable Debian Stretch Live DVD once you have installed DebEX LXDE to hard drive. I mean change everything and then create a whole new Debian Stretch live system. When you start Refracta it will look like this. You don’t even have to install DebEX to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Debian 9 system while running DebEX from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 10 min!  You’ll find the ISO in /home/snapshots.

SCREENSHOTS
1. The Boot menu in DebEX LXDE created with the Refracta tools
2. The LXDE Desktop in DebEX Barebone LXDE
3.  Netflix is running in Firefox
4. DebEX is running in VirtualBox
5. DebEX is running in VMware

READ MORE…

RaspEX for Raspberry Pi 3/2 – Build 170810 – based on Ubuntu 17.04 with LXDE and kernel 4.9.41-exton-v7+

NEWS 170810 about RaspEX for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.4.49 with “my own” compiled kernel 4.9.41-exton-v7+. RaspEX Build 170810 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian 9, Ubuntu 17.04 and Linaro (Open Source software for ARM SoCs). In this new version (170810) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 170810.

Compatibility :: August 2017

Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Lollipop, RaspAnd Marshmallow, RaspAnd Nougat 7.1.1, RaspAnd 7.1.2 and RaspArch. I have now (170810) upgraded all systems. Read about the new Raspberry Pi 3

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Screenshot 4 – RaspEX running Blueman (Bluetooth Manager)

Kernel
Kernel 4.9.41-exton-v7 is used.

How do I install RaspEX in Windows?
Just like any other Raspberry Pi system. I.e.: Unpack the downloaded ZIP file (raspex-ubuntu-17.04-lxde-1190mb-170810.zip) and transfer the IMAGE file (raspex-ubuntu-17.04-lxde-3050mb-170810.img) to your Micro SD card of at least 8GB. For that you shall use Win32DiskImager in Windows.

SCREENSHOTS

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC-viewer

Screenshot 4 – RaspEX running Midori Private Browser

Screenshot 5 – RaspEX using Pavucontrol (for sound)

Screenshot 6 – RaspEX running SMTube (search and watch YouTube videos)

Screenshot 7 – RaspEX running the Bluetooth Manager

Screenshot 8 – The Desktop 170810

READ MORE…

Run Raspberry Pi PIXEL Desktop on a PC or Mac – an Exton modified Build 170425 with Refracta Tools

NEWS 170425 about Raspberry Pi Debian Pixel
I have updated my first Debian Pixel Build from 161223. Study all included packages – latest by 170425. I’ve also added NetworkManager, which makes it easier to configure wireless connections.

NEWS 161223
Yesterday I read that the Raspberry Pi Foundation has announced the release of a new PIXEL image that can be booted on a PC or Mac. Study this site. I saw immediately that there was no installer included, which I thought was a little disappointing. Come to think of Refracta tools, which work very well in Debian and Ubuntu. I quickly made a “remix” of the Raspberry Pi Foundation PIXEL image. My remix thus include Refracta tools. This means that you can easily install the system to hard drive and you can just as easily make your own remix of the Raspberry Pi Foundation PIXEL image. Study all included packages. I’ve added a few packages. Most important Synaptic, which I find essential.

Screenshots
Wifi connection using NetworkManager
Wifi connection established

READ MORE…

RaspEX for Raspberry Pi 3/2 – Build 170221 – based on Ubuntu 16.10 with LXDE, kernel 4.4.49-exton-v7+

NEWS 170221 about RaspEX for Raspberry Pi 3 and Pi 2
I have upgraded the whole system and replaced the old kernel 4.4.21 with “my own” compiled kernel 4.4.49-exton-v7+. RaspEX Build 170221 is a Linux ARM system for Raspberry Pi 3 and Pi 2. It is based on Debian Jessie (Debian 8.7), Ubuntu Yakkety Yak (Ubuntu 16.10, released 161013) and Linaro (Open Source software for ARM SoCs). In this new version (170221) I’ve installed Wicd Network Manager and replaced Chromium with Firefox with better support for YouTube. I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 3 or Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools, Midori Private Browser, SMTube (YouTube browser which allows to browse, search and play YouTube videos) and PulseAudio for better sound in YouTube. Study all installed packages in RaspEX Build 170221.

Raspberry Pi 3: How much better is it than the Raspberry Pi 2?
Raspberry Pi 3 is performing 10 times faster than that of the Pi 1 and around 50 percent better than that of the Pi 2 according to testers.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Jessie) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member at this site thought that running RaspEX (for Raspberry Pi 2) was like running Raspberry Pi on “steroids“. RaspEX Build 170221 and 160703 (with OpenCPN) are (of course) even faster, especially if you run the systems on a Raspberry Pi 3 computer.

Compatibility :: February 2017
Unfortunately not all systems made for Raspberry Pi 2 will run on the new Pi 3. They need to be upgraded with a new kernel. I therefore have to upgrade the systems I distribute. I.e. RaspEX, RaspEX with OpenCPN, RaspAnd Lollipop, RaspAnd Marshmallow, RaspAnd Nougat and RaspArch. I have now (170221) upgraded all systems. Read about the new Raspberry Pi 3

View all installed packages in RaspEX – Build 170221

SCREENSHOTS
Screenshot 1 – RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)

Screenshot 2 – RaspEX connected to Windows via Samba

Screenshot 3 – RaspEX connected to Windows via PuTTy

Screenshot 4 – RaspEX “running on” Windows with VNC-viewer

Screenshot 5 – RaspEX running Midori Private Browser

Screenshot 6 – RaspEX using Pavucontrol (for sound)

Screenshot 7 – RaspEX running SMTube (search and watch YouTube videos)

Screenshot 8 – RaspEX running the Bluetooth Manager

READ MORE…

CruxEX 3.3 (CRUX 3.3) live USB with LXDE and kernel 4.9.9-exton – Build 170216

CruxEX 3.3 64 bit Linux Live USB is based on CRUX 3.3 (latest version, released 170212), which is all Linux enthusiasts/nerds favorite OS. (CRUX is a lightweight Linux distribution for the x86-64 architecture targeted at experienced Linux users. The primary focus of this distribution is keep it simple, which is reflected in a straightforward tar.gz-based package system, BSD-style initscripts, and a relatively small collection of trimmed packages. The secondary focus is utilization of new Linux features and recent tools and libraries. CRUX also has a ports system which makes it easy to install and upgrade applications). CruxEX 3.3 2017 uses the LXDE Desktop environment. I have replaced the original CRUX kernel with “my” special kernel 4.9.9-exton, with support for “extra everything”.

Kernel etc
Kernel 4.9.9 is the latest available stable kernel as of 170216. Among all installed and updated applications are Firefox 51.0, GParted 0.27, File Roller 3.22 (Archive Manager), Gimp 2.8.18, Nvidia Graphics driver 375.26 and Wicd 1.7.2. Furthermore compilation tools so that you can install programs from source.

Unique
CruxEX 3.3 2017 build 170216 is – as my previous CRUX-remasters – unique in the world. I.e. there is no other CRUX Live CD/USB (as far as I know). In any case, not for downloading.

See a screenshot of the LXDE Desktop

Screenshot: Prt-get in action

Study ALL installed packages…

READ MORE…

RaspArch Build 161205 :: Run Arch Linux on your Raspberry Pi 3 or Pi 2 computer

rasparch-logoThis version (161205) is my fourth build of RaspArch
The first version is from 150414. The second is from 151107. The third is from 160312 specially made for the new Raspberry Pi 3. This version (161205) and version 160312 of RaspArch can of course also run on the “old” Raspberry Pi 2. RaspArch is a “remaster” of Arch Linux ARM. The original compressed system is of 231 MB. After I have added the LXDE Desktop environment, PulseAudio, Firefox, Yaourt and Gimp the system increased to 700 MB. RaspArch is a “ready-to-go” ARM system. It must be installed on a Raspberry Pi 3 model B or Pi 2 computer.

NEWS in RaspArch Build 161205
A new kernel – 4.4.35-1-ARCH. All included packages have been updated to the latest version as of 161205. I have added support for Yaourt – a Pacman Fronted. I have also installed PulseAudio. Finally the sound works alright in RaspArch. Nice if you like YouTube. Note: To be able to install Yaourt I had to install a lot of development tools. In the first place I installed Yaourt to be able to install Google Chrome (only to learn that Google Chrome isn’t available for the ARM architecture).

More about RaspArch
When you have installed RaspArch to your Micro SD Card you can use the system like any other Arch Linux system. I.e. install new programs etc. Arch motto is KISS (Keep It Simple Stupid). RaspArch uses kernel 4.4.35-1-ARCH and the LXDE Desktop environment.

BENEFITS of Arch Linux/RaspArch

“Cutting Edge”-software and speed. A member on this site recently wrote this about RaspArch: I’ve used Slackware, Debian, Gentoo, Ubuntu & Arch. I prefer Arch. Ubuntu is easier to install, Arch is easier to keep up to date. You do not go through big, painful, changes every year instead you just update, once in a while, make changes if instructed. Arch has most of the benefits of Gentoo without the pain of recompiling _everything_. When you do need to build a package in Arch its painless especially if you use one of the tools that support Aur (I like yaourt). Arch avoids the politics of Debian and Ubuntu and delivers a great Linux distribution. RaspArch now brings these advantages to the PI 2.

Study all installed packages in RaspArch

Screenshot of RaspArch’s Desktop – YouTube and PulseAudio Control running
Screenshot of RaspArch’s Desktop – YouTube and Alsamixer running

READ MORE…