Tag Archives: Debian

RaspEX – Build 151027 based on Ubuntu 15.10 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151027 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8.1), Ubuntu Wily Werewolf (Ubuntu 15.10, released 151022) and Linaro (Open Source software for ARM SoCs). In this new version (151027) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). Furthermore some extra Network Tools.

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

View all installed packages in RaspEX – Build 151027

View RaspEX new Desktop 151027

READ MORE…

RaspEX – Build 151001 – with SSH, Samba and VNC4Server >> Connect to your Windows computers

raspberry-logoNEWS 151001 ABOUT RaspEX
My first version of RaspEX is from 150318 and my second from 150706. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (151001) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube). I have also installed Samba and VNC4Server so you can connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client).

Screenshot 1 – RaspEX connected to Windows via Samba

Screenshot 2 – RaspEX connected to Windows via PuTTy

Screenshot 3 – RaspEX “running on” Windows with VNC Viewer

About RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) and many other useful programs pre-installed. Chromium is used as Web Browser and Synaptic as Package Manager. You can use Samba and VNC4Server to connect to your Windows computers in your Home Network and/or control RaspEX on your Raspberry Pi 2 from your Windows computers with VNC Viewer and/or PuTTY (Telnet and SSH client). You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu’s software repositories so you can install thousands of extra packages if you want.

Why shall I use RaspEX?

Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

About SSH, PuTTY, Samba, VNC4Server and VNC Viewer
SSH, Samba and VNC4Server are pre-installed in RaspEX Build 151001. You need to install PuTTy and and VNC Viewer in your Windows system if you want to connect to RaspEX/Raspberry Pi 2 from Windows the way the below slideshow shows. (Please read the developers information about how to configure PuTTy and VNC Viewer).

Watch this slideshow re. connections between RaspEX and Windows.

READ MORE….

Run your Ubuntu/Debian 64 bit system with the latest kernel!

logo-linux-exton-netI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.2.0-7-exton, equivalent to Kernel.org’s latest stable kernel 4.2 released 150830.

What’s new in kernel 4.2? One million new lines of code in kernel 4.2! (The biggest kernel release ever according to Linus Torvalds).

Install kernel 4.2.0-7-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (Debian 8.1). If you want to use my kernel 4.2.0-7-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-4.2.0-7-exton.zip which is of 63,3 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.2.0-7-exton.zip. Go into the folder ubuntu-kernel-64bit-4.2.0-7-exton and run this command:
sudo dpkg -i *.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.2.0-7-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.0 – 4.2 without “patches” etc. On the other hand it’s a fact that kernel 4.2 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.2.0-7-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!

DebEX (Debian 8.1) Gnome with kernel 4.1.0-3-exton

debianRedNEWS 150831 about DebEX Gnome
I have made a new extra version of DebEX, which I call DebEX Gnome Live DVD. It’s a pure Debian system. It uses Gnome 3.14 and Mate 1.8.2 as Desktop environments. Gnome 3.14 is winning back disillusioned Linux users. I have installed Nvidia’s proprietary graphic driver 352.41 in this new version of DebEX. Furthermore Google Chrome to make it possible to watch Netflix movies. All other installed packages have also been updated to the latest version of 150831.

About DebEX Barebone, DebEX Gnome and DebEX KDE Linux 64 bit
All three systems/distributions are a based on Debian Jessie (Debian 8.1). There are also certain elements of Debian Sid (unstable). Xfce 4.12 (released 150228 after about three years work!) is used as Desktop environment in DebEX Barebone. It aims to be fast and low on system resources, while still being visually appealing and user friendly. Gnome 3.14 is used in DebEX Gnome. KDE 4.14.3 and KDE Plasma Desktop 5:84 is used in DebEX KDE. DebEX Barebone uses “my” special kernel 3.18.0-8-exton (equivalent to Kernel.org’s stable kernel 3.18.1). DebEX Gnome and DebEX KDE use “my” special kernel 4.1.0-3-exton equivalent to Kernel.org’s stable kernel 4.1.3. The system language is English (in all three versions of DebEX).

Runs from RAM
DebEX Gnome can run from RAM. Use Boot alternative 2 (Copy to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run DebEX from RAM.

About Nvidia’s proprietary graphic driver 340.65/352.41 in all three versions of DebEX
If you can and want to use said driver you’ll have to leave X/Xfce4/KDE by pressing Ctrl Alt F1 followed by Ctrl Alt F2. Log in as root with password root. Then run the command nvidia-xconfig (to create /etc/X11/xorg.conf). Then run startx to enter X/Xfce4/KDE again. You will notice a big difference if you have the right (modern/new) Nvidia card. On certain computers you can’t leave X by pressing Ctrl Alt F1. In that case you can only use said driver after a hard drive installation of DebEX. Then run the command nvidia-xconfig and restart your computer. The Nvidia drivers has support for the following GPUs: GeForce 800A, GeForce 800M, GeForce GTX 970M and GeForce GTX 980M.

Rolling distribution
Debian Jessie/DebEX are rolling distributions, which implies that once you have installed the system on the hard drive there is no need for re-installations (which otherwise is common in the Linux world). This means, for example, that you can go on and install Gnome 3.14 or/and KDE 4.14.3 in DebEX Barebone/KDE. I.e. the latest versions (as of 150831) of Gnome and KDE.

Screenshot of the Gnome Desktop in version 150831 of DebEX Gnome

READ MORE…

DebEX (Debian 8.1) KDE with kernel 4.1.0-3-exton

debianRedNEWS 150830 about DebEX KDE
I have made a new version of DebEX KDE Live DVD. It replaces version 150219. It’s a pure Debian 8.1 system. I.e.: There are no Ubuntu or Kubuntu elements involved. DebEX KDE uses KDE 4.14.3 and KDE Plasma Desktop 5:84 as Desktop environment and kernel 4.1.0-3-exton. I have installed Nvidia’s proprietary graphic driver 352.41. Furthermore Google Chrome to make it possible to watch Netflix movies. I’ve added SMPlayer – an alternative to Vlc. (SMPlayer is a free media player for Windows and Linux with built-in codecs that can play virtually all video and audio formats. It doesn’t need any external codecs. Just install SMPlayer and you’ll be able to play all formats without the hassle to find and install codec packs). All other installed packages have also been updated to the latest version of 150830. Study the full package list.

About DebEX Barebone, DebEX Gnome and DebEX KDE Linux 64 bit
All three systems/distributions are a based on Debian Jessie (Debian 8.1). There are also certain elements of Debian Sid (unstable). Xfce 4.12 (released 150228 after about three years work!) is used as Desktop environment in DebEX Barebone. It aims to be fast and low on system resources, while still being visually appealing and user friendly. Gnome 3.14 is used in DebEX Gnome. KDE 4.14.3 and KDE Plasma Desktop 5:84 is used in DebEX KDE. DebEX Barebone uses “my” special kernel 3.18.0-8-exton (equivalent to Kernel.org’s stable kernel 3.18.1). So does DebEX Gnome version 150122. DebEX KDE uses “my” special kernel 4.1.0-3-exton equivalent to Kernel.org’s stable kernel 4.1.3.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

About Nvidia’s proprietary graphic driver 340.65/
352.41 in all three versions of DebEX
If you can and want to use said driver you’ll have to leave X/Xfce4/KDE by pressing Ctrl Alt F1 followed by Ctrl Alt F2. Log in as root with password root. Then run the command nvidia-xconfig (to create /etc/X11/xorg.conf). Then run startx to enter X/Xfce4/KDE again. You will notice a big difference if you have the right (modern/new) Nvidia card. On certain computers you can’t leave X by pressing Ctrl Alt F1. In that case you can only use said driver after a hard drive installation of DebEX. Then run the command nvidia-xconfig and restart your computer. The Nvidia drivers has support for the following GPUs: GeForce 800A, GeForce 800M, GeForce GTX 970M and GeForce GTX 980M.

Rolling distribution
Debian Jessie/DebEX are rolling distributions, which implies that once you have installed the system on the hard drive there is no need for re-installations (which otherwise is common in the Linux world). This means, for example, that you can go on and install Gnome 3.14 or/and KDE 4.14.3 in DebEX Barebone/KDE. I.e. the latest versions (as of 150830) of Gnome and KDE.

The system language is English (in all three versions of DebEX).

Screenshot of the KDE Plasma Desktop in version 150830 of DebEX KDE

READ MORE…

Run your Ubuntu/Debian 64 bit system with kernel 4.1.3!

logo-linux-exton-netI have compiled yet another Ubuntu/Debian kernel for 64 bit systems. This time kernel 4.1.0-3-exton, equivalent to Kernel.org’s stable kernel 4.1.3.

What’s new in kernel 4.1? (Linux 4.1 is a major update to the Linux kernel)

Install kernel 4.1.0-3-exton in Ubuntu/Debian based distributions
My self-compiled Ubuntu kernels can be used in all types of modern Ubuntu systems, including Mint. They can even be used in Debian Jessie (Debian 8.1). If you want to use my kernel 4.1.0-3-exton for 64 bit systems, you can DOWNLOAD it from here.

md5sum for ubuntu-kernel-64bit-4.1.0-3-exton.zip which is of 62,8 MB.

Installation instructions
Open the zip-file with WinZip, WinRAR or 7-Zip. Or run this command: unzip ubuntu-kernel-64bit-4.1.0-3-exton.zip. Go into the folder ubuntu-kernel-64bit-4.1.0-3-exton and run this command:
sudo dpkg -i linux-headers-4.1.0-3_4.1.0-3.3_all.deb \
linux-headers-4.1.0-3-exton_4.1.0-3.3_amd64.deb \
linux-image-4.1.0-3-exton_4.1.0-3.3_amd64.deb

Then: Run command sudo update-grub (if you use Grub2).

Nvidia
It is possible to install Nvidia’s proprietary drivers if you use “my” kernel 4.1.0-3-exton. Could be useful if you like to play games. Please read this instruction. The Nvidia drivers in for example Ubuntu’s repositories – “Current” etc. – can’t be used. It is supposed to be “impossible” to install Nvidia’s latest drivers when running kernel 4.0 – 4.1 without “patches” etc. On the other hand it’s a fact that kernel 4.1 has better support for the open-source Nvidia driver Nouveau than any other older kernel.

A small clarification
“My” kernel 4.1.0-3-exton is compiled exactly the same way as all official Ubuntu kernels. That is, The Ubuntu Way. If not, the kernel would not function in a Ubuntu/Debian system.

Good luck!

RaspEX (Edition 150706) for Raspberry Pi 2 based on Debian 8, Ubuntu 15.04 and Linaro :: Free download

raspberry-logoNEWS 150706 ABOUT RaspEX
My first version of RaspEX is from 150318. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs). In this new version (150706) I’ve installed Wicd Network Manager and added support for Adobe Flash in Chromium (so you can watch YouTube).

Softpedia review

RaspEX version 150508 was reviewed by Softpedia 150509.

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberrypi.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion). One member on this site thought that running RaspEX was like running Raspberry on “steroids“.

Screenshot of RaspEX’s Desktop while Wicd is running (for configuration of a wireless connection)

READ MORE…

RaspEX (Edition 150508) for Raspberry Pi 2 based on Debian 8, Ubuntu 15.04 and Linaro :: Free download

raspberry-logoNEWS 150508 ABOUT RaspEX
My first version of RaspEX is from 150318. I have now upgraded the whole system. RaspEX is a Linux ARM system for Raspberry Pi 2. It is based on Debian Jessie (Debian 8), Ubuntu Vivid Vervet (Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs).

Softpedia review
RaspEX version 150318 was reviewed by Softpedia 150404.

What is Raspberry Pi?
The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

model-b-plus-300x225
Raspberry Pi model B made in February 2015. It has a 900MHz quad-core ARM Cortex-A7 CPU and 1GB RAM. Read more…

Why shall I use RaspEX?
Eight Operating Systems are recommended by Raspberry.org. Among them Noobs, Raspbian (Debian Wheezy) and Snappy Ubuntu Core. RaspEX is faster (“fast as lightning”), more useful and more fun to use. (In my opinion).

View all installed packages in RaspEX

When logged in as root your Desktop will look like this.
raspex-desktop-screenshot-linaro
Click to view a larger picture

READ MORE…

RaspEX for Raspberry Pi 2 based on Debian “Jessie”, Ubuntu “Vivid Vervet” (15.04) and Linaro :: Free download

raspberry-logoNEWS 150403
RaspEX can now be downloaded for free.

News 150318
I have made a perfect (as I think) Linux ARM system for Raspberry Pi 2. I call it RaspEX. It is based on Debian Jessie (upcoming Debian 8), Ubuntu Vivid Vervet (upcoming Ubuntu 15.04) and Linaro (Open Source software for ARM SoCs).

What is Raspberry Pi?
The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.
Read more about Raspberry Pi…

model-b-plus-300x225
Raspberry Pi model B made in February 2015. It has a 900MHz quad-core ARM Cortex-A7 CPU and 1GB RAM. Read more…

About RaspEX
RaspEX is a full Linux Desktop system with LXDE (an extremely fast-performing and energy-saving desktop environment) and many other useful programs pre-installed. Chromium is used as Web Browser and Synaptic as Package Manager. You can use Synaptic to install any extra packages you may need. For example LibreOffice. RaspEX uses Ubuntu and Linaro software repositories so you can install thousands of extra packages if you want.

READ MORE…

DebEX Barebone 64 bit Live DVD with Xfce 4.12, released 150228 after three years of work

DebianNEWS about DebEX Barebone 150329
A new version of DebEX Barebone with Xfce 4.12 and kernel 3.18.0-8-exton (equivalent to Kernel.org’s stable kernel 3.18.1) is ready. I have installed Nvidia’s proprietary graphic driver 340.65. All packages have been updated to the latest version as of Mars 29, 2015.

Announcement about Xfce 4.12, released 150228
Today, after 2 years and 10 months of work, we are pleased to announce the release of the Xfce desktop 4.12, a new stable version that supersedes Xfce 4.10. This long period can only be explained by how awesome Xfce 4.10 was. But as all things, it needed some refreshing – and for that we saw lots of new contributors providing valuable feedback, features and bugfixes. As always, Xfce follows its steady pace of evolution without revolution that seems to match our users’ needs.

Unique?

As far as I know there is not other Linux live cd/dvd with Xfce 4.12.

Three versions of DebEX: DebEX Barebone, DebEX Gnome and DebEX KDE Linux 64 bit
All three systems/distributions are based on Debian Jessie (upcoming Debian 8). There are also certain elements of Debian Sid (unstable). Xfce 4.12 (released 150228 after about three years work!) is used as Desktop environment in DebEX Barebone. It aims to be fast and low on system resources, while still being visually appealing and user friendly. Gnome 3.14 is used in DebEX Gnome. KDE 4.14.3 and KDE Plasma Desktop 5:84 is used in DebEX KDE. DebEX Barebone uses “my” special kernel 3.18.0-8-exton (equivalent to Kernel.org’s stable kernel 3.18.1). So does DebEX Gnome version 150122. DebEX KDE uses “my” special kernel 3.19.0-5-exton equivalent to Kernel.org’s stable kernel 3.19.0. The system language is English (in all three versions of DebEX).

Screenshot of the Xfce 4.12 Desktop

READ MORE…